How to select a large equipment of up to 100 rotations per minute for a 1,000-kw parallel-axis decelerator production plant. The type of parallel axle-reducing plant that can be matched at this time is rx107, r137, r147 and r167. This is a matching parallel axle decelerator manufacturer model. This is a match for the f-series parallel axle-reducing plant. in such cases, only r-series parallel-axis decelerators can matchInduction motor, k-series parallel axle-reducing machines. At this time, the rate of deceleration with the power generation of 45 kw was in the range of 6. 22 to 68. 25. The parallel axle-reducing plant ratio at this time ranges from 8. 69 to 221. The power of the electric power is 45kw. At this point, the user asked for 45kw power, so the type of parallel axle decelerator manufacturer that could be matched in such a case could exclude the s series parallel axle decelerator manufacturer, or parallel axle. In this case, a detailed parallel axle decelerator manufacturer model could be selected for matching use. The transmissions used in different equipment are different, so the parallel axle-reducing machines used in such cases need to be matched with sufficient twists to drive his operation. At this point in time, the users do not have detailed requirements for the type of parallel axle-reducing manufacturer, so in this case we would like to use four series of parallel axle-reducing manufacturers to match the type of parallel axle-reducing manufacturer. Some of the engineering equipment, however, tends to be more heavy, and may require a more heavy load to drive in the site environment. The corresponding parallel axle axle axle axle axle axle axle, ka 107 axle, kaf 107 axle and kf 107 axle axle. select the power and the parallel axis of the deviceGeared motorIn such cases, attention should be paid to the detailed parameter requirements of the equipment before matching them. At this point, there was no exactly 10-to- 10, and the closer to 9.96。

In such cases, the user ' s requirements are interpreted, and the power of the power of the power plant and the output rotation of the cog-axis production plant are well defined, so that in such cases the corresponding parallel-axis reduction manufacturer model can be selected more simply. use f seriesGearbocWhen matched, the corresponding parallel axle-reducing plant models are f107, f127 and f157. At this point, the rate-reducing ratio ranged from 1. 44 to 73. 70, and was not exactly 10 in this range, but it was close to 10. 13, at which point the corresponding parallel axle-reducing plant model was r107 or rf107. And there's not exactly 10 on the list, but it's closer to 9. 94. The power of the user is 1,000 turns, while the output is 100 turns, at which point the rate of reduction is 10 to 10. The model of the corresponding parallel axle-reducing plant at this time may be chosen for the f107 parallel axle-reducing plant, the ff107 parallel axle, the faf107 parallel axle-reducing plant and the fa107 parallel axle-reducing plant. yesMotor-gear reducerThe type of parallel axle axle axle axle axle axle axle axle, K27, K137, K147, K157, K167, K187, K187. In this context, the match between the R-series parallel axle-reducing plant was examined. In the selection of a previous user, he asked for a 100-rotation-per-minute production plant using a 1,000-turn 45-kW power plant with a parallel axle reduction machine, at which point he should choose which model to match. When selecting parallel axle decelerators for large equipment, they do not need a very high rate of turn-off, but they do require a larger output twist. http://boserlgearreducer.com/product/list-pingxzoujiansuji-cn.html