10. 3 kw/10300w power power should be of a type s decelerator type. during the user selection process, he did not have detailed parameters, so in such a case, consideration should be given to the alignment of the parameters on the selected sample, which would match the type sGeared motorThe models are s87, s97, s107, s127. Detailed models can be consulted with boserl technical staff or downloaded for sample viewing. the equipment of the user consists of a sift box, with a fixed secondary seat at the bottom of the sift box at the four corners, a feed pipe on the left side of the sift box, a base for the conductor on the left side of the inner cascading box, a protection box on the left side of the base of the sift, and a driver, a driver, a driverType-s deceleratorThe output end extends to the base of the material and is fitted with a hanger, the right flow of the gallon is fitted with an axle bearing, the right flow of the bearing is fitted with a control column with a fixed connection to the end of the wrench, the right end of the control pillar is fitted with the inner right side wall of the scavenger through the flow of the bearing, the mobility set on the outside side wall of the control column is fitted with a wind wheel, the right side of the wind wheel is connected with a slider on the outside side of the control column, and the slider is fitted with a limit bolt and a fixed assembly of the control column, the inner cavity of the scavell is secured with a filtration net at the top of the conductor, and the scaverage network provides a guidance channel with a scavenger matching to the scavengerHelical-worm gearmotorThe driving sift box is fitted to the left side with a line of material, the sift box is fitted to the bottom with a second line of material corresponding to the right side of the base of the conductor, the control panel is fixed to the left side of the sifter, and the sift is fitted with a window of observation corresponding to the gallon on the front side of the sifter. The right-side wall of the sifter box is, on average, equipped with a windhole, and the right-side wall of the sifter box is fitted with a filtration net to ensure air flow. The background to the use of air current screening covers multiple areas and has important applications and roles in different areas。

Air current screening is also widely used in scientific research fields, such as material science, physics, chemistry, and topics such as physical and chemical properties of materials, particle morphology and size. The whole job was to import materials into the sifter by means of a feed fight and to activate the drive through the control panelType-s decelerator, drive boserlParallel axle reduction powerLeads to the rolling of gallons, which can break the material through gallons, while allowing for the delivery of the material, which can then be transported through the guidance channel of the sifting network to the second line, and is able to move the material through the sifting web to the second line, while, at the same time, the s-stealing wheel can drive the wind wheeling up on the control column, which can also be subject to centrifugation and cyclone propulsion, thus enabling the material to be sprayed through the sifting net, so that the small particles can be removed from a scavenger through a scavenger, and the wheel can move through the scaveurs, which can change the wind wheel ' s position on the control column, and then fix it by a scavenger, so that it can adjust the wind wheel ' s position against the scavenger, so that it can adapt to the size of the material in real time, and so that it can adapt in a progressive manner, so that it can quickly achieve scave. A user's request is to use the last 10. 3 kw power setType-s deceleratorMake a combination of his equipment, at this timeType-s deceleratorType selection is usedType-s deceleratorI don't know. This is the user's equipment using the serverType-s deceleratorSome things. Well, in that case, we should choose how bigType-s deceleratorIt'll be more appropriate to match the model. What are the operational parameters requirements during the operation? in the user's selection process, his request was to use 10300 w in a snail snailType-s deceleratorGrouping, but no more parameters for meetingsbrakes motor-reducerselect the type so it is not easy to select a detailed model for matching use in such a situation. the air current sift is a device for the classification of solid materials, mainly for the classification, sifting and separation of powdered and particulate matter. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html