How can a standing gear-reducing machine be selected for a 1-46-reducing machine on a dust removal device

2022-02-03 22:06:18 阅读

How can a standing gear-reducing machine be selected for a 1-46-reducing machine on a dust removal device? In the equipment's selection of the motor-reducing machine, his requirement was to match the 46-comparisonreducing device for use, in which case no parameters were required to limit the type of the hard-to-penetrating device and the selection of the functional parameters, and therefore it was difficult to select a detailed model for use. The front and back end of the cavity of the box are provided with a slider, the front and back side of the screwdriver are attached to the slider, and the side of the slider is extended to the inner cavity of the glitter, and the back end of the cavity of the tube is connected to the inner cavitySnail scalding, the output end of the snail snail deceleration machine has a fixed connection to the dust-rolling pole and the — end of the scavenger is connected to the internal flow of the tube through the bearings. The top fixed connection to the cavity of the box is a treatment box, the inner cavity of the treatment box is equipped with a filtration net, the top and bottom of the filtration net are connected to the inner wall of the treatment box, the left side of the handle is connected to the left side of the cavity, the left side of the cavity of the tube is connected to the left side of the cavity of the cavity of the box, the right side of the cavity of the cavity is connected to the vacuum cleaner is connected to the right side, the vent of the venting machine is connected to the right side of the handler, the inflow of the vacuum cleaner is connected to the hose, one end of the contorture is passed through the tube and there is a separate pipe, and the front and back end of the cavity of the tube is connected to the inner wall of the cavity, both sides of the cavities are attached to the bar, a fixed plate is connected to the side of the wall in the perm of the perm, and the front of the perm of the perm. you can download the selected sample, or get boserlGeared motorSelecting technologists for your equipment requirements

One to forty-six

When the user selects the corresponding electric decelerator model for his furniture removal equipment, it is not easy to match the corresponding decelerator. Let's take a look at some details of the user's equipment. This is some of the details of the user's equipment, but in this case there are no detailed parameters, so it's not easy to match the corresponding powerAn umbrella gear-reducing machineThe model was matched to meet the requirements of his equipment. In the production of furniture, there is often an invisible aspect, as much dust as there is in the production of furniture, and in order to make the production workshop more quiet, the resulting dust usually needs to be cleaned up, so there are dust removal equipment. In the process of selecting a user, his request was to choose to use an electric decelerator for his depolicing equipment, but it was not known how appropriate to choose the type of a decelerator to match it, so that in such a case it would be appropriate to match the use to the actual needs. In the process of choosing areducing machine, his request was to choose to use 46-to--reducing devices to satisfy real needs, but what would be the appropriate mix at this time? See some details below. It is therefore important to know the detailed parameters requirements of the equipment and how, in such cases, thereducing motors can be fitted in order to form a 46-comparison rate-reducing ratio to combine the actual usage requirements of the equipment. A piece of furniture plate dust removal equipment, including a box, with a fixed right-hand connection to the cavity of the box having an electric deceleratorReducer+Motorthe output end is fixed by a screwdriver, and the left end of the screwdriver is connected by a bearing to the left of the cavity of the box, the surface thread of the screwdriver is connected by a screwdriver, the bottom of the screwdriver is fixed by an automatic stretcher pole, and the bottom of the self-strangling pole by a fixed link is piped. furniture is an object that we often have access to. http://boserlgearreducer.com/product/list-rfxiliijiansuji-cn.html

Keywords: Bevel Gear Reducer Selection_Hardened Gear Surface Reducer Motor Selection_Helical Gear Reducer Selection_Bevel Gear Reducer Selection_Worm Gear Servo Motor and Reducer Selection

标签: 1-to- 46-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-to-1-to-1-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to--to-to-to-to-to-to-

tag： 1-to- 46-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-1-to-to-1-to-1-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to-to--to-to-to-to-to-to-

Documentation related to this product / Related DownLoad

Product Document Name	Click to download
One-to-six-to-six