What should be the choice of a 1500 rt with 1. 5 kw for a 30-to-threereducing machine? A 30. 28 for a three-to-peerreducing machine, which is more appropriate and closer, corresponds to the k57reducing machine. So what kind of snailreducing machine should be the appropriate match to a gear-reducing machine? Let's look at the details. thereducing machines that match the electrics are used toreducing machines and tkmRight-angle shaft reducer motorIt's all the style of a more often matchedreducing machine. In the course of the operation of the different equipment, the power required is different because of the different ways in which the different equipment operates. The r-cycle gear-reducing machine was selected for a combination that did not coincide with a 30-to-30--reducing ratio, but there was a close 30. 18, which was not significantly different from actual demand, and the three--reducing machine was of the r57 or rf57 type. If matched by a k-seriesreducing machine, this three-phase-reducing machine does not happen to match the 1. 5-kw electric machine at this time, but there is a close 30. 22, when thereducing machine corresponds to the k67. At this point, the rate reduction ratio corresponds to the reduction model f57. In the absence of a determination as to whichreducing machines are to be matched, the type ofreducing machines we choose is to be as aware as possible of the requirements of the equipment. None of the other types of brakes meet this requirement. And if you choose to use a parallel axle reducer for matching, do you have any of the parameters for the corresponding reducer at this point in time? we use b0serlGeared motorThe four main series of retrenchor selection samples were also close to 30.15 in parameters at the time, none of which happened to be 30。

And there's a snail scalding machine. In a recent selection process, one user made such a request when selecting the corresponding electric andreducing machines: what he needed was a 1,500-turned 1. 5-kw power machine matching a 30-to-cent decelerator. In the selection of those models, the four series of slowdownrs did not seem to be so appropriate, as there were no exactly 30-to-centreducing machines in terms of the rate-reducing ratio, so in such a case, a more economical one was chosen. select to use self-lockingHelical-worm gearmotorIf matched, there is a significant difference between the rate of deceleration of 30 to actual demand, which is 29. 63 or 32. 48. If you don't know what kind of slow-down is more appropriate in the selection process, consult the technical staff of the b0serl slow-down machine, who will select, at your request, the right type of slow-down machine to distribute the data on your parameters. In the general selection process, the 1,400-turner of 4ps is used, while thereducing machine is used for 1,500-turner machines, then the choice at this time depends on the corresponding rate-reducing ratio, as long as the rate-reducing ratio is 30 for the user, while the output-reverse and the output-reverse ratio of the three-segregation machines are not the same as when the machine is matched. in this case, when the device is running, the corresponding power is selected according to the needs of the output twister andThree-phase variant powerreducing machinei don't know. at this point, no changes are required to meet the corresponding requirements and are therefore relatively convenient. at this point, thereducing machine of thisreducing machine could be 30-to-30. http://boserlgearreducer.com/product/list-fafxilijiansuji-cn.html