3. 6 kw's standing gear-reducing power set for air floaters? (a) the upper end of the air plume is equipped with four fixed blocks, two transformer stages are mounted between four fixed blocks, two gears are mounted on the two axes, two belts are attached to each other, two belts between the same sides are transferred through belts, and two belts are attached to each belt are connected to multiple docks, each is equipped with a webboard, each is equipped with a netboard, two sets are installed on the back end of the air plume, two sets are mounted between two sets of plumes, two gears are installed between the plumes, two gears are mounted on the plumes, two gears are mounted on the pylons, a pyl wheel is installed on the pylon 3. 6 kw is installed on the pylons, a set of pylons is installed on the wind pylons, and a voltler is driven to the back-voltage voltageVertical reducerWhen moving the wheel, moving the wheel, moving the wheel with the belt and belt, moving at the same time with multiple sets of connectors, extracting multiple web panels from the murky surface of the air plume, moving back to the side of the fan's shell, starting a set of 3. 6 kw gears, moving the fan roll, enabling the fan to dry the board, placing the murder attached to the netboard in a collection, replicating it, reducing the hysteria attached to the webboard, and avoiding any subsequent chording and cleaning。

At this point, it matches a set of three-and-a-six-kw gear-downs. Yes: rf57, rf67, rf77, rf87, rf97, rf107, rf137 and some combination models. The user's devices include a gas plume, aqueduct door, aqueducts and aqueducts, which are connected through aqueous plume door to the air plume, which are installed at the top of the air plume, and two transformers, two belts, poles, fan hulls, fan motors, leaves, poles, controllers, magazines and drive machines, and four fixed blocks at the top of the air plume, two rotors in separate rolls, placed between four fixed blocks, two sets of 3. 6 kw standing gearsGeared motorThe transfer axis is fitted with two sets of belts, two sets of belts, moving between the same side of the belts, multiple docks between the two sets of belts, a connector panel on each set, a network panel on each set of connectors, two sets of fittings at the back end of the air plume, a pole fixed between the two sets of embosses, a fan shell mounted on the back of the air piping pole, a set of fixed gears installed on the air plume of the 3. 6kw, the exit and back end of the windmill, an output end of the winder and a wire connection, a fixed connection of the blade inside the wind coop, a fixed connection between the bottom of the control unit and the top of the air plume, a moving battery mounted on the back of the air plume, a fixed gear set up on the back end of the wind plume, an exit and back of the windmill, an equal connection between the windmill and a control. in the absence of more parameters, let's look at some of the things in the model。

In a user's selection process, his request was to use a set of three-and-a-six-kw gear-downs to match, and in this case his request was to use three-and-a-six-kwIt's a gear-reducing machineA set of matchings, and how big is a three-and-a-six-kW set of gear-reducing machines? So let's take a look today at the three-and-a-half-kW stand-by gear-retarder set of options. The application market for air floats is very broad and involves many different industries and areas. At the same time, during the water treatment process, he can choose to help remove the floating particles and floats from the water and to improve the clean-up of the water. Aeroplanes are one of the core facilities in sewage treatment plants, which are used mainly for the removal of solid particles from sewage and for the float. This is a detailed set of flat gear-reducing machines using 3.6 KW for user equipment. See if there are parameters for a 3.6KW set of 3.6KT gear-reducing machines with a defined type. In the user's selection process, his request is to use a set of three-to-three-kW gear-reducing machines for matching use. In this case, we need to consider some of the detailed parameters of the equipment, and then choose the appropriate model for matching use. They can also be used in the food and drink industry for choice and for lipolipsing, such as dairy processing, clarification of fruit juice, etc. http://boserlgearreducer.com/product/list-rfxiliijiansuji-cn.html