4. 1 kw/4100w is suitable for the size of the s-series decelerator_boserl movement. Battery machines can be used to assist staff in quickly and correctly unplugging or cutting the package and improving the efficiency of their work. at work, start up the motor that drives boserlSeries sGeared motorThe job is to place the fracking of the weeds in the cauldron, either by hand or by a feeder, and the weeds fall into the cauldron, and the weeds go through further squeeze through the cleavages, with several broken teeth to tear them apart, then fall on the fourth wedge, to tear them up further, and then drain them from the source and use the next process. During the user selection process, his request was to use the 4,100 w power plant for a combination of the s-series decelerator and, in the absence of additional parameters, to look at some details of the user ' s equipment. Two-and-a-half-breed sticks and a third-breed wheel in the opposite direction were squeezed and dispersed. There are observation doors on both the front and the back of herbs. During the user ' s above-mentioned process, there are no detailed parameter requirements, so it is not easy to select a detailed model for matching, so look at the configuration on the selected sample. In a recent user's selection, his request was to use a 4. 1 kw power setSeries sA combination ofreducing machines is used as a driver, and in this case a series sreducing machine is required. To prevent the rolling of the main axis and chain during the operation of the machine. it'll match the 4,100 w-3Helical-worm gearmotorS67, s77, s87, s97, s97rf57. the electrics drive the tatters through the belt, the other sets and theSeries sThereducing machine drives a double-tangled roller to complete a process. A number of broken teeth are in the shape of sharp horn triangles。

After coming in from a puddle, igrass first falls on a broken wheel, then on a broken irrigated irradiation, then on a tatter, then on a tatter, then on a tatter, then on a tatter, then on a tatter, then on a tatter, then on a tatter, and then on the tatter, then on the tatter, then on the tatter, and then on the tatter, and then out of the tatter and out of the next leg. Detailed model selection can consult boserl selected technical staff. The sharp horn triangle is sharp and can quickly break and break the weeds. In the logistics industry, products are usually bundled or packaged to facilitate transport and handling. There is a protection door on the side of the pyroscope. Internal working conditions can be observed through observation doors, and the machine is now easy to clear. in the warehousing industry, goods are also often required to be packed or bundled。Servo motor reducerThe wheeled rags are placed between the feeder's and the weed's. At the top of the user's flaccid rack is a feeder, the lower part of the feeder is connected to the larvae, the bottom of the flaccid bag is a feeder, and there are four flaccid bundles in the flaccid bag, with several broken teeth on the outer circle of the broken wheel. This is the user's equipmentSeries sSome cases ofreducing powering. When the product arrives at its destination, the package needs to be unplugged or cut, and then the bundle needs to be broken. the main axle of the fourth broken-up stick is connected to the electric power through the belt, the upper part of the electric power is equipped with the second and the second with the boserl through the second beltSeries sThe slow-down is connectedSeries sThe main axle of thereducing machine is connected to the end of the double-breathed main axis by a cog, and the second cog is tied to the other end of the second-breathed main axle by a chain. How, then, would a combination of equipment that would be more suitable for a suitable household? Let's see the rags todayThrough-hole shaft reducerselect some of the situations. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html