Geared motor,Moto Reducteur,Motor reducer,Reducer Motor

Integrated Motor and Gearbox Unit_Complete Motorized Gear Reducer Set_German BOSERL Electric Motor and Gearbox Manufacturer

Tel:

Email:[email protected]

Whatsapp:+8618617264619

Selection of Speed Reducers
网站首页 > BOSERL News > Selection of Speed Reducers

5. 4kw/5400w power model size k-series speed-reducing machine

2023-12-15 11:58:19 阅读

5. 4 kw/5400w power model size of k-series reduction machine. there's still no k series in the descriptionGeared motorIn this case, lookMotor-gear reducerThe configuration on the selected sample. Detailed selections can be done by consulting boserl selection technicians or by downloading samples. the upper surface of the dryer tank is set with a feeder, the transporter is set at the upper end of the feeder, and the feeder is set at the lower end of the feederMotor-gear reducerSnails are attached to the lower end of the feeder's plate, and the mixing oars consist of a roller pole and multiple sets of mixers, which are connected to the gearMotor-gear reducerThe power-outside surface, with multiple sets of mixers at a distance fixed on both sides of the roller's surface, and the soybean slag is transported through the carrier to the dryerMotor-gear reducerDrivers mix oars to mix with soybean slags, allowing them to dry on average inside the dryer boxes. This is the user's equipmentMotor-gear reducerSome things. It'll matchSeries kGeared motorThe models are: k67, k77, k87, k97, k107, k127 and the combinations are usable. The soya-dryers, including dehydrator racks, the surfaces of the dehydrator racks are fitted with support racks, the support racks are mounted on the surfaces of the dehydrator racks, the dehydrator racks are mounted on the upper end of the dehydrator racks, the dehydrator racks and the side surfaces of the dehydrator are mounted on the support racks, the dehydrator racks are mounted on the support racks, and the slags are pushed to the surfaces of the transporter to extract the water, and the extruded water is drained through the pentage and entered the interior of the dehydrator racks to achieve collection of wastewater. Soybean slag is a by-product of soybean processing, which contains rich nutrients, such as proteins and cellulose, which, through drying of soybean slag dryers, can reduce soybean slag's water content rate, extend its shelf life, improve its quality and make it more suitable for use as feed, fertilizer, etc. , and improve its utilization value。

Motor-gear reducer.jpg

The side of the transporter is set with a slider, the surface screw of the conveyor is fitted with a feeder gas tank, the surface screw of the feeder tank is fitted with a thruster plate, the slider is connected to the surface of the conveyor and slider, the slider is set on the side of the conveyor, and the slider is made up of a guide seat and an installer. In the user's selection process, his request was to use an electric setMotor-gear reducerThe combination is used, and in this case the power of the power of the machine he chooses to use is determined to be 5,400 w, andMotor-gear reducerIt's using the k seriesRight-angle shaft reducer motorSee some of the equipment in the absence of more parameters for water。Motor-gear reducer(a) The powered transporter has a perforation hole in its interior, and the transporter slides to the surface of the partition, with a heating tube on the surface of the partition, with multiple sets of perforation holes, with a permeable wall fixed within the permeable hole, with an average permeable distance inside the permeable, with multiple panels in multiple groups, and an average distance setting for multiple panelsMotor-gear reducerThe drive-delay slides on the lower surface of the multiple slabs, the slabs are fixed on the surface of the slabs, the slabs are fixed on the surface of the support slabs, the heated snails are installed on the side of the slabs, and the slabs are separated by multiple slabs into multiple sectors, thus dispersing the slags and avoiding soybean slags condensing on the surface of the slabsing, while preheating the leg lanes with ten treatments through the heating tube. Soybean slag dryer is a device for drying soybean slag. A user's request is to use a power supplyMotor-gear reducerMatching on his device, at which point his request was to use a combination of a 5. 4-kw powerer with a k-series decelerator, and in which case how much should it beSecond-stage brakesthe model would be more appropriate. let's look at some of the user devices. http://boserlgearreducer.com/product/list-kxiliejiansuji-cn.html

Keywords: Bevel Gear Reducer Selection_Hardened Gear Surface Reducer Motor Selection_Helical Gear Reducer Selection_Bevel Gear Reducer Selection_Worm Gear Servo Motor and Reducer Selection


标签:  5. 4kw/5400w power model size k-series speed-reducing machine

Documentation related to this product / Related DownLoad

Product Document Name Click to download
5. 4kw/5400w power model size k-series decelerator sample download Click to download
CONTACT

Contact us

Guangdong Boshi Transmission Technology Co., Ltd.

Contact: Mr. Zhang

Mobile: +86 13360667204 (also WeChat ID)

Email: [email protected]

Address: Xiedi Industrial Zone, Wanjiang District, Dongguan City, Guangdong Province

ATTENTION

ATTENTION

Copyrights©2018 Guangdong Boshi Transmission Technology Co., Ltd. All Rights Reserved Powered by MetInfo 7.1.0©2008-2025MetInfo Inc.