6. 3 kw/6300w power model size of s seriesreducing machine? Some information about the user's equipment is available without more parameters. the grinding device is installed on the left side of the support frame through the wheel, the grinding device is fixed by the wheel, which is smooth and fast, the grinding gear is replaced by a rolling grinding device, the grinding effect is advanced, a lock axis is placed on the wheel, which allows locking on the wheel to avoid scrolling on the wheel during grinding, and the grinding device is grounded on the wheel by fixing itHangerreducing powerIt's in the millHelical-worm gearmotorThe two real grinding wheels on the rolling axle and the protective shield mounted on the outside of the grinding wheel are made up of it, driven by a grinding machineHelical-worm gearmotorDriver a grinding wheel for high- rotation to grind a silicon molybdenum bar, shielding around a grinding wheel setting to avoid a non-painting position, while collecting powder generated by grinding to avoid scattered contamination of the environment, fixed devices include a mobile table that controls the movement of the right and the right through the hand wheel and the screw, fixed drums that are fixed on the flow table, rotors that are placed in fixed drums through a bearing, pallet boards that are fixed to the left end of the rotor, belt wheels that are mounted with the axis in the centre of the rotor and roller snails that are fixed on the flow table through a belt-led wheelerGeared motor(b) The smooth movement of the right and right control flow tables by wheeling, thus changing the grinding position of the silicone rod, limiting the position of the rotor to the bearing, the rotation of the roller through belts and belt-driven rollers, the fixed non-disturbation of the silon rods using a cardboard, the fixed connection of the right end of the rotor to the fixed plate to the fixed plate, the fixed alignment of the silon rods in the rotor with a second plate, the considerable improvement of the coaxe during the rotation of the silon rods, the progress of the grinding, and the ability to adjust to the various diameter sizes of the silon rods, the installation of a water spray tube on the wheel, the use of a hose to spray water to the grinder position, the avoidance of dust, the reduction of temperature, the installation of a water hole in the protection substrate, the support of a wheel pump with a collection tank and a plume, the collection of waste water from the silian rods, and their recycling for recycling。

The user's request is to use 6. 3 kw power for s seriesServo motor reducerHow much should we have in this caseHelical-worm gearmotorIt is not known how much of the model is used and how much of the functional parameter is selected, so in this case the equipment should be considered to select the corresponding model and the parameters to be matched. A grinder is a machine designed to grind, grind or polish materials. Detailed equipment selections can be done either by consulting boserl selected technicians or by downloading samples to see the detailed configurations. the user's silica rods produce a grinder, which is mainly a support rack, a fixer, a grinder and a driveHelical-worm gearmotorComposition. Use on user equipmentHelical-worm gearmotorAs a drive for the equipment, he was asked for parameters in this case, and in this case the electrics chose to use 6300 w with snailsHelical-worm gearmotorSo how do we fit in? YeahHelical-worm gearmotorSometimes the power of the power is expressed in the form of power, sometimes in the form of a seating number. At this point, look at some details on the selected samples, which match s67, s77, s87, s97. this is the user's equipmentHelical-worm gearmotorSome things. The use of industrial production is very extensive, improving the quality and efficiency of production, while facilitating production in different industries. No detailed parameters are required during the above user selection process, so it is not easy to select the detailsPower-reducing machinemodel matches. in the metalworking industry, grinders can be used for surface treatment of metal works to remove bad surface state such as twitching, scratching, oxidation, etc., and to make their surfaces smooth and bright and high-precision. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html