6.5 KW/6500W power model size F seriesreducing machine. A second roller header is installed at the lower end of the support pole without locking in the spring, a support earboard is installed at the lower end of the one-u-shaped frame, a fixed rotor is installed inside the support earboard, and a gear is installed on the left side of the upper seatGear with motorDrives an electric pusher, which has a rotating flow kit connected to a fixed rolling connection on the top end of the pole and a locator support block on the right side of the top end of the seat, and a scrolling link to the second u-shaped frame on the upper end of the support block. Let's take a look at the parameters on the selected sample. Detailed equipment selections can be done by consulting or downloading a sample of BOSERL selected technicians. This is the user's equipment serviceInduction motorSome things. The fixed rack is equipped with a moving conveyor truncheon, an upper conveyor belt on the side of the ring of the moving convection, a shield on the outer surface of the upper conveyor belt, a moving wheel on the left side of the front end of the fixed frame, a driver ' s motor from the right side of the moving wheel, a active wheel on the front side of the engine, a u-shaped support frame on the left side of the lower end of the fixed frame, a biu-shaped support frame on the right side of the lower end of the fixed rack, a lower-mounted support panel at the lower end of the fixed frame, and a non-locked gas spring extension support pole on the lower side. It matches the F series of 6.5 KWGearbocThe models are: f57, f67, f77, f87, f97, f107 and combinations can be used in a matching manner. Let's look at some details of the user's equipment. Following the rapid evolution of industrialization and automation, the use of feeder machines has become increasingly widespread, not only to significantly reduce production cycles and improve production efficiency, but also to reduce manual manipulation and improve production safety and quality. let's see what the user's feed isInduction motorSelect some of the situations。

At the same time, the advantages of flexibility, simplicity, time savings and human capital in the use of feed machines are among the reasons for their widespread application. In such cases, no detailed parameters are required, so it is not easy to select a detailed model for matching use. Connector panels are installed on the top end of the unlocked spring stretcher support pole to the lower end of the lower mounted support plate, which is fixed by welding with the unlocked spring stretcher support pole and the lower mounted support plate. The user selects the power for his feed and..Geared motorIn the selection process, his request was to use the 6500 w on the parallel axisInduction motorGrouping, but no other parameters are required. In this case, because of the incomplete parameters, it is difficult to select a detailed model for matching use. The other groupInduction motorThe driving active wheel has a moving belt, which matches the specifications of the active wheel and the moving wheel. A support component consisting of two sets of support components with the same specifications for two sets of support components, symmetrically set to the middle of the lower end of the fixed frame, was formed from the non-locking spring stretcher support pole, the lower mounted support panel and the second scroller comparison. Including fixed racks, shielding, from the wheel, active wheel, driveInduction motorAnd the seat. In the selection of a user who had recently been contacted, his request was to use a 6. 5-kw power setInduction motorGrouping, taking into account the actual situation of the user ' s equipment, and selecting the parameters to be usedInduction motorThe model would be more appropriate. By means of an orderly approach, the whole equipment can be operated。