6. 9 kw/6900w power, type f brakes. A chain-oriented wheel is set in front of the head belt wheel. These are some of the user's equipment. In transporters with very steep slopes, the main belt and the auxiliary belt drive wheel have been installed at very different heights, so that they need to be provided with a drive and a support unit, respectively. in a recent user selection process, his request was to use oneType fGeared motorMatching on his equipment, at which point his request was to use a 6. 9 kw power setType f deceleratorMake a match. How much should it be in a situation like thisType f deceleratorIt's more appropriate to match the model. Let's see what's on the beltType f deceleratorSelect some of the situations. In this main belt and the auxiliary belt, which are electric and driven, respectively, the wheel and the rolling velocity of the head of the wheel, which drive the belt, will vary, and the factors that determine this difference are electrical and characteristic. As a result, at the time of the transporter ' s operation, two belts were constantly frictioned, which increased wear and caused noise. The auxiliary belt's head-belt wheel is connected by a joint axis to an electric power driveType f decelerationThe box. Power-drivenType f deceleratorThe output axle is connected to the head belt wheel by a joint axis. The assistive belt is also a belt, which covers the material that falls on the main belt and wraps it between the wheel of the head belt and the wheel of the tail belt. The head belt wheel is connected to the drive, and when the material is delivered, it falls from the material to the lower end of the main belt. The difference in load between the main belt and the assistive belt. Power-drivenType f deceleratorDrives the wheel of the chain above the wheel on the head of the auxiliary belt. The sign indicates a flat belt, which is between the wheel of the head belt and the wheel of the tail belt. There's a very high promotion and a very large belt transporter in a unit timeSpeed-down powerDrives the main conveyor belt and an auxiliary conveyor belt. the matching models are f77, f87, f97, f107, f127, f127rf87。

Detailed selections can consult boserl selected technicians or download selected samples to see detailed parameter configurations. Is the head belt wheel and the top view of the main belt and the auxiliary belt. This assistive belt is driven by a drive connected to the head belt wheel and moves along the main belt. in the above-mentioned selection, his request was to use an electric power setServo motor reducerAs a driver, because of the lack of parameters, some of the selected samples are examined in this context. The wheel is not power-driven, it can be a steering wheel, while the head belt of the main belt can be used by oneType f deceleratorDrive, the chain wheel, the steering wheel and the rotational chain constitute power transfer devices similar to those in the first instance. In the course of industrial production, it is possible to automate the continuous transport of leather belts, avoiding labour-intensive and inefficient topics of manual transport and making significant progress in production efficiency. Because of the load and..Type f decelerationDifferences in electric power supply due to error in the box and the deceleration ratio. It is structured in a simple, manipulative and adaptive manner and can be used in a variety of work environments. The difference in the rate of scrolling between the main and assistive belts results in a difference in the rate of running between them. The material is placed on the main conveyor belt and covered by the auxiliary conveyor belt, both of which are driven by the area. in the user selection process, his request was to use the f series with the 6900 w powerGearbocUse it. How big should it beType f deceleratorit's more appropriate to combine models. let's look at some of the user's devices today, and then look at the size of the model. http://boserlgearreducer.com/product/list-fxiliijiansuji-cn.html