9. 9 kw/9900w power should be of the type s decelerator type. This has led to improvements in production efficiency by reducing the human and time-intensive capacity and the automation of materials through the continuous delivery and automated manipulation of poles. Traditional manual handling of materials can easily cause injury to workers, while the axle transporter can automatically complete the delivery of materials, reducing the risk of artificial damage. by starting the turbineServo motor reducerThe screws on it are rotated so that the screws drive their ups and downs, so that the moving blocks move through the connecting poles that drive the cams, so that the condensed 1-type fixed-blocker adjusts the width spacing and, at the same time, pulls out the poles on the fixed poles on the side of the 1st fixed-column, thereby moving the stretchers in the irradiated axis to the point of transport. Detailed model selections are available to BOSERL selected technical staff. In the user selection process, his request was to use the previous power setType-s deceleratorThe power of the power of the electric power is limited in the case of his equipment, which is used as a drive drive for his equipmentType-s deceleratorType selects the lockType-s deceleratorI don't know. One of the equipment improvement staff's requirements was to use the previous power supplyType-s deceleratorOn his equipment, and in this case, his request was to use a 9. 9 kw power machine with a snailType-s deceleratorWe'll use it in combination. We don't know how muchType sGeared motorIt would be more appropriate to match the model, so he asked about the selection of the boserl technical staff。

Maintenance doors are installed on both sides of the front of the base seat, which are primarily for the purpose of repairing parts of the moving structure within the slot, and on both sides of the base seat, which are equipped with electrical units at one endTurn frequency brakes slowing downthe output end moves the screws, the other end of the screws fixes the interior of the first bearing, the screws of the screws connects the moving blocks, the top of the moving blocks rotates through the fixed poles attached to the 1st fixed block, and by initiating the engine to drive the screws on them to and from them, which in turn allows the moving blocks to move through the connecting poles to drive the caskets, thus allowing the length spacing of the 1st fixed unit to be adjusted, while pushing the poles on the side of the 1st fixed block to drive the branches outward. (c) installation of 1 fixed block at the top of the base of the user ' s conveyor, with 1 fixed block, which functions primarily as an installation and rotational support for the mixed axis on its side, and 2 bearings on the inside of the 1 fixed blockType-s decelerator(c) The drive-on-axis is connected to the flat strip, the second bearing is transmitted mainly to the fixed pole, which indirectly leads to the moving action of the flat belt on the peri-axis, the internal fixed connection pole of the two bearings, the fixed end of the fixed pole is connected to the pole within the peri-axis, and the fixed end of the pole is connected to the connectorType-s deceleratorThe connectors are fixed on the side of the stretcher pole, the other end of the stretcher is in the center of the fixed pole, the inside of the stick is in the center with a slot, the inside of the scalding pole is in the interior, the inside of the 1st fixed block is in the center fixed with a protective shell, and the inside of the shield is in the center with a fixed pole, thus making it easier for the Boserl gear of the fixed rodType-s deceleratorThe stretching poles within the drive shafts are scaled and the width of the transport surface is increased, and the volume of items is progressive. But aboveSecond-stage brakesThe selection parameter requirements are not sufficient to select a detailed model for matching use, so we need to look at some of the selection samples. The models that can be matched at this time are s87, s97, s107, s127. so what do these two parameters requireType-s deceleratorit's more appropriate to match the model. let's look at some of his equipment. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html