What should be taken into account in the use of low-rotation reduction machines at high altitude? So the environment for such use and the environment is more stringent for slow-down machines, so this is a different situation. It is not the same for Xinjiang and Hainan, whether the geological resources are still the weather temperature. At different altitudes, on machines that use different operating mechanisms in different environments, forreducing machines on equipment, orSpeed brakes slowing downThere are different demands. Since, in low-pressure environments, the temperature at which the water is boiled will also decrease, and the forced cold fans of the tails during the gear reduction motor s will continue to operate, and there will be no means of dispersing where the air pressure is low or insufficient, which will result in a higher temperature of thereducing power, which will easily pose a danger to the body, there will be a specially usedreducing machine and the correspondingreducing machine at the altitude. Because of the size of the country, different provinces and cities may be at different latitudes, and the weather and resources created vary. In addition to the high altitude, there is an environment in which the use needs to be monitored by a bow, which requires deep underground operation in the course of use, which may also cause lower air pressure at this time, so there will be a similar generality. So we need to consider the type of power used in this case. It is therefore necessary to understand the equipment ' s own environment of use and a basic condition of its operation before choosing areducing device to match the corresponding equipment. AsReducer+MotorWe can think of different use environments that use design and produce the correspondingcutting machines and electric machines. The choice of a hard-to-penetrate slow-down machine at this time also requires adaptation to this use environment to select a suitable slow-down machine。

♪ Make ours ♪Electric brakesWhatever the environment in which they are used, they are capable of meeting the demands of machines. In the production of equipment, we are constantly improving the functioning of our electric andreducing machines and the environment in which they should be used. Only with a different level of knowledge of the equipment will it be possible to know which of your equipment'sreducing machines matches thereducing machines. And some users, when choosing areducing machine, would say that the low-rotation-reducing machine he purchased was used in high-altitude areas, so what do those areas need to be aware of when using a similar power-reducing machine, and why does the altitude have a different degree of impact on the gear-reducing machine or the snail-reducing opportunity? I'm here today to tell you what the difference is between the use of different altitude areas and the need for gear brakes or other types of equipmentLow-turn reduction machinehow should this be done? because the power is modified, it can be exposed to a variety of environmental topics at high altitude, like low air pressure. it is more common in this process to use a tunnel or metro with a few shields or other equipment, some coal mining equipment, etc., which is underground, so there are differences in the temperature and pressure of the environment relative to the ground. we all know that high-altitude air pressure is low, so it's different for electrics to operate in such an environment than in low-altitude areas, so you need to tell the seller about your use. http://boserlgearreducer.com/product/list-sfxiliejiansuji-cn.html