A roller-mixer should need a 22-32-turn-outreducing machine. So users can choose one suitable for their own use. However, within the range of requirements, some of thes of use are: 22, 25, 28, 26, 29, 32 and 30. So we're going to use 5. 5-kw to match thereducing machine and see which series of hornbox models are the more appropriate models. These are the selected models. And.Induction motorThe range of output rotations that can be matched when matching 5. 5 kw power is also wide, ranging from 2. 5 to 281 per minute. In this range, the range of output rotations is 2. 2 to 1115 per minute. The direct-anglereducing machine of type k is used with a wider range of matching models and the parameters that are formed, with an output range of 0. 8 to 280 per minute. This is some of the models that match. Some of the four output values at this time are within range of 22, 24, 28 and 31. And for the roller mixer, you can look at the diameter of the roller mixer and the volume that needs to be handled at a time during the work, without knowing the load. In the selection of a moving corner box type of a user a short time ago, the user wanted to use a combination of areducing machine on a mechanical device. different modelsGeared motorThe size of the installation is different。

So how do you choose a suitable gear-retarder mixer, depending on the user's needs? The user has so far provided only one output-by-out, but there are no other parameters that are more difficult to chooseStand-by gear brakesModels, so users need to provide other parameters. The corresponding models are r107, r97 and r87. With two parameters, the actual demand forreducing machines can be extrapolated. These can be matched by f97, f87 and f77. There are many machines used in the process of industrial production, and different machines have their own unique ways of operating and sources of power provision. The corresponding types at this time are s97 and s87. Since the type of installation of a different type ofreducing machine is different in the four series, it is important to look at the size of the installation space and the actual requirements of the equipment. At this time, the required outputs are 23, 26, 30 and 32 per minute, corresponding to the choice of type: k97, k87 and k77. The main output was a roller mixer, on which areducing machine was required to provide an output of between 22 and 32 turns, at which time the corresponding operation was performed. That's some of the models that the user requires to use a 5. 5-kw power to match a 22-32-turn output range. In this context, there is a shift from 22 to 32 for users. that's why, after communicating with the user, the user can identify a matchingreducing machineDouble-hole output reductionThe power is 5.5 kW. If a S-seriesreducing machine with a lock-in function is used, the output can be turned 22, 24, 26, 29, 32, 26 and 23. http://boserlgearreducer.com/product/list-kxiliejiansuji-cn.html