The small mixer matched the 3kw power with a snail snail to 280. Let's see what happens with the two non-gangreducing machines. the user requirement is 280, in which case there are parameters required by the user。Gear with motorThe mode of adjustment that can be used in the event of a failure to match is to convert the matching power into a variable frequency power. If there is no corresponding parameter in the parameter list, then in this case the other parameter will have to be qualified for the corresponding debugging. There is a difference in the use of different equipment, in which case it is necessary to select the corresponding electric andreducing machines to match the equipment for a power drive. So what we need in this case is to reconcile, as far as possible, in a different way to satisfy the user's needs. The range ofreducing ratio that can be matched at this time is between 7. 5 and 80. If the s seriesreducing machines are matched, the s57, s67, s77, s87, s97 and s97r57 are matched. What kind of snail-driver-driver is there in such a case? ~ a sample of the selected type of b0serl-driver is used below to see what type ofdriver can be used at this time? In that case, let's make a choice with a two-er. at this point, the type of brake has been determined, so we'll consider using itHelical-worm gearmotorAndreducing machines match. Clearly, the range of such parameters is not so suitable for the use of the equipment as to exclude the reduction。

It's the type ofreducing machine you can matchMotor gearedThereducing ratio of the s series ranged from 7. 28 to 287. Different parameters are more varied when they are used, so in this case you can choose to communicate with the b0serl decelerator technologist about the actual situation. One user's request was to use an electricreducing machine for his small mixer, at which point his request was to use a 3kw electric machine to match the snail snail-reducing machine to 280. The driving premise chosen under different conditions is different. If the parameters of 287 are selected for use, at this time the corresponding type ofreducing machine is f97r57, the output-reverse is 4580nm, the output-reverse rate is 5. 1 per minute, with a safety factor of 0. 9 matched by a snail-barrel-reducing machine, at this point the comparable type ofreducing machine is 075, 090, 110 and 130, which can be matched. There are many types of selections such as this, so that users can match the electrics used and the gear-reducing machines according to their actual needs. Although there are not exactly 280 at this time, there is a relative 287. In this way, the output can be turned to meet the needs of users. it's the s series ofreducing machines that are more suitable in the tworeducing machines selected aboveGeared motorit is more appropriate to use, in which case the deceleration ratio does not coincide with the user's needs, so in such cases it is necessary to see more about how much of the equipment needs to be retrofitted, and then to determine how it is more appropriate to adjust in detail based on the retrofitting of the output. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html