What should we notice when a stand-down brake matches a 7. 5-kw high-temperature 4-p heater? A limiting premise is also required during the integration to select the detailed type of thereducing machine. So, without parameters, you can choose to use a hard-to-penetrating machine. The average electric power is used at a temperature of about 60 degrees, while the machine ' s body temperature should not exceed 70 degrees, otherwise the failure is easily widespread, which is a condition for the use of the normal three-symmetric motor. different types of different types of installationFlow-reducing electric powerThe models and the matching parameters are different, so they are identified when selecting the models in order to avoid later changes. Instead, users do not have detailed requirements for the type of stand-down brakes, and in the case of aing machine, all of them are compatible. The four formulas in the four series ofreducing machines can match the power of the power, and there are several types ofreducing machines in each model, and in this case there are four different modes of output. In some cases where the work environment is similar to steel mills or coal treatments, the work environment is very hot. Let's share a user's case today. He needs a high-temperature 7. 5-kw 4-p gear-reducing machine to match thereducing machine to his high-temperature environmentVertical reducerAnd what? When using high-temperature-resistant power, we need to know the temperature environment in which the user lives, as the process of using high-temperature-resistant hard-temperature-reducing machines is also required for the temperature of the environment. The ambient temperature of the user is 80 degrees, and high-temperature power is available in such an environment. Induction Motor 3Ph machines are those that use a matching high-temperature-resistant environment. High-temperature-resistant electrics can withstand ambient temperatures of 150 degrees。

So, in the recommended model, it is also used to match domestic phone use. They convert the subject to several levels in the temperature that the electric power adapts to. It is a case of the introduction of refined articles from high-temperature furnaces or the insertion of fuel into the furnaces, where the mechanical or mechanical components are subjected to such high temperatures, so we need to use high-temperature-resistant devices for the equipment. In this environment of use, we use four major series more oftenGeared motorAs the four series ofreducing machines can cope with different environments, they are sufficient. How do you match the power and the stand-downs used by the equipment at such a high temperature? Working in such high-temperature conditions, where staff cannot remain in this environment for long periods of time, is done using automated machinery. So at this point, we'll have to look at the installation to determine what to useServo motor reducerthe direct-angle installation and the coaxial installation are still in the form of parallel-axis installation. the user environment is 80 degrees, so it is a little higher than the average level to be able to satisfy the need for use. this special use environment requires that the selected technical staff be informed about the use environment and the requirements for use before choosing areducing machine, or that the general environment be chosen by default without knowledge of the environment. some users in the process of use would ask if the electrics were to use high-temperature gear-reducing machines. http://boserlgearreducer.com/product/list-rfxilijiansuji-cn.html