Spiral cortex retrenchors match two axes long on the elevator device? The output of thereducing machine in combination can be converted to an output below 0. 1. If you do not know how to choose a suitable model, then you can consult the technical staff of the b0serlreducing machine, who will guide you to the appropriate model. In the course of industrial production, different types of equipment are used differently in the production process, so a variety of equipment is available. that's why it's a double axleSpiral cone gear deceleratorIt is also important to see if the user is not targeted. At this point, then, users want to know how to select a combination ofreducing machines for matching use. In the section of the request where no parameters are required, there are often more models to choose at this time, as well as more parameters. In a situation like this, the user we recommend is a k-series decelerator. The type of the k-series decelerator at this time ranges from the k-37 to the k-187 and a number of models that combine with the r-series gear-reducing machines. but the user will elect to use a propeller gear brake that matchesGeared motorIt's not self-locking, so you need to match the brakes when you match the power. In the use of the equipment, the driver was based on a gear-reducing motor. At this point, however, the user does not have any other parameters and only one axis is long. At this point, however, the user needs to know the size of the axis of its double-out axle-dumper. In the absence of parameters, in such cases the user would have provided only relevant parameters to select a detailed model。

If this parameter is determined, it could also be excluded, since some of the models ofreducing machines do not reach this large output axis. In a situation like this, we don't know what type to choose. So in this case, the type of match we recommend is the brakesStand-by gear brakesUse it. Since the k-seriesreducing machines are adequate for user requirements. As producers of power-reducing machines, we can accept non-standard customizations from users. But there are a lot of models in the k series that can be matched. But there are also very non-target cases of longer axes, where users in the process of selecting their use need to continuously reduce the diameter of the axis at one end of the axis and to make a key slot on the axis. There are still a large number of users in a situation like this, and because they do not understand thereducing machine on the one hand and are unclear about their own equipment on the other, they are confused when selecting the device and do not know which is the appropriate one. Like thereducing machines used on the elevators, the need to match the electrics is due to the need for the elevators. one user is a lifter in a recent selection process, which requires a propeller gear decelerator in the form of a straight-angle installation and a double-axis approach, and a top user in the process needs toGearbocThe length of the two out-axis increased to 1.2 m. And the length of the axle, as a slowing machine, we can customize as long as the user needs it. The power of the power that matches at this time is from 0.12 KW to 200 KW, which matches this K-series cone gear-reducing machine. We would like to be able to provide the corresponding size drawings for non-standard sizes. In this case, the user can determine the size of its two-axis. http://boserlgearreducer.com/product/list-kxiliejiansuji-cn.html