How do you choose a f seriesreducing machine on a coal belt? now he wants to operate with areducing device in the f series, and at this point, choose the one-to-twenty-lower to use on his coal beltGearbocWhat about the model and the power of the power of the machine? Today, the case of a coal belt picker looks at what useful parameters should be provided when the belt chooses to use the electric reduction model. The instruction is used to indicate that the retrofit is to adjust the current transmission of the conveyor to the target. It is also used to monitor the running currents of the electric power and to send a cut-off instruction to thereferral unit when determining that the operating currents of the electrical power exceed the predetermined current thresholds. Since the detailed parameters requirements are not clear, it is not easy to determine the model at this time for the user to use on his coal belt. PLC, in turn, is used to obtain the current transmission of the said conveyor, and to determine the volume of I-transmitting coal per hour on the conveyor belt, based on the height of the said coal, the of transmission driven by the current F-series reduction machine, the width of the belt on the conveyor and the density of the coal, and to determine the size of I-transmitting coal per hour for coal display and transferer per hour for coal transmission machines, as well as to determine the retrenching instructions to theing device. When the user chooses to use an electric gear-reducing machine for his coal belt, it is required to use areducing ratio of 1:20, at a time when it does not know how much load on the coal belt and how much it needs to be used in the course of its operation, so it is not easy to choose in such circumstances to match itGeared motorThe model and the corresponding power of the machine, if this type of belt transporter is selected, the power of the f series decelerator and the power of the generator is calculated by the parameters of the belt transporter。

As users are required to use plc connections, it is recommended in this case to use the server and thereducing machine for the sorting of the serviceReducer+MotorUse it on the equipment. Plc, which is used to receive the said coal volume signals and to determine thereduction instruction to thereducing device based on the per hour-to-heavy coal display and pre-set coal star thresholds marked by the coal volume signals. It is used to send a signal of coal quantity to plc, which is used to mark the amount of coal given to the machine per hour. The loads of the belts and the at which the belts operate, the parameters of which allow the power of the generator to be measured and the reduction ratio to be calculated. A great deal of machinery will be used in coal mining from mining areas to storage areas. (b) therelaying gearing device, which is used to adjust the current transmission of the conveyor to target transmission in accordance with thereferral instruction. At different stages, the machine or equipment used is to select a suitable use according to the circumstances. In the absence of parameters, let's look at the user's equipment requirements and the connection of some devices. In the recent selection of a user, he needed to improve a belt machine for coal mining, at which point he needed to replace the moving equipment on the original device. users ' belt-belt transmission systems, including: for coal machines, programmable control box plc, driverThree-phase variant powerreducing machine,fixing and conveyor belts, to connect the coal machine to PLC, which is connected to the conveyor belt through thefixing device. Depending on the circumstances, PLC is set to control the operation of other equipment. http://boserlgearreducer.com/product/list-fxiliijiansuji-cn.html