The power-reducing unit is used on cutting devices. You can submit to our selected technologists the conditions in which the equipment is being used, and the parameters that you know at the time of design, and they'll give you a suitablereducing machine for a moving programme. This is why it is necessary at this time to consult with the technical staff of thereducing machine to select the corresponding motor-reducing unit for matching use to meet the requirements of his equipment, depending on the circumstances. If he chooses the r-series decelerator, his electrical performance ranges between 0. 12 and 132 kilowatts, and choosesHelical-worm gearmotorIf matched, it can match between 0.12 kW and 22 kW. This is a requirement for equipment users to provide some of the functional parameters that can be used by the expresser selection technicians, which will be converted from one formulae to another. In selecting the motorreducing machine on the cutter, some users use the tilt gear-reducing machine, while others choose to use the snail snail-reducing machine, and the choice of the particularreducing machine needs to be decided in conjunction with the details of the operation of the equipment. The power of the different types of reduction machines is different. The cutting devices were either large-scale or small-scale, and he was different from the different cutting devices. These parameters are used for screening and the corresponding electronometric deceleration model. But different typesGeared motorTheir functional differences and the difference in the functional parameters that can be matched are relatively large, as compared to the use of r-series and s-series。

So today, when it comes to the model of the motor-reducing machine used on the cutting device, attention should be paid to the subject matter and how to choose the appropriatereducing model for use to match that of the equipment master. But the users are choosing a driver for these devicesDouble- power deceleratorAt the same time, they did not know how large the type of power-reducing machine they chose to match was used by a more suitable household. In general, when choosing a type, we need to know a few parameters: the cutter, how much spin that cutter will have to rotate in a minute, and how hard he will need to cut the material in order to intercept the corresponding material. It's like a rotor or a ceramic cutter. When selecting an electric decelerator for cutting devices, it is first important to know the sector where the cutting device is connected to the f-series decelerator under the circumstances in which it is used and how much it operates. So in the selection process, you can't use someone else's model on your machine, ourreducing machine, and the technicians will match your equipment with a suitable electric andreducing machine. the second is to cut different materials, which are different in strength, because, in the process of cutting, it's like cutting ceramics and rubber, and they don't have the same level of strength in their operationReducer+Motorthe output will vary. during the production of some materials, it is sometimes necessary to cut the residual or the raw material, and in the course of cutting, machines are usually used for cutting, and in such cases some users need cutting devices. http://boserlgearreducer.com/product/list-rxxilijiansuji-cn.html