How do you choose a 1500 w machine to match a 50-to-50 snail brake? The range of the deviance ratio formed during such matching is 75 to 500, the range of the output rate is between 35 and 3733 and the range of the output twist is between 35nm and 2279nm. These are some of the basic parameters that match. in this case, you can also choose the 4938Flow-reducing electric powerThe type is s77, sa77, sf77 or saf77. Here are some of the parameters on the selection of the b0serlreducing machine. Are there parameters in the list of parameters at this time that coincide with 50? There are no parameters in the list at this time that are exactly 50-by-cent, but there are relatively close parameters of 4938-by. This is the type ofreducing machine that you can match. In the process of matching, many users do not know how to match, so we've been consulted by many users about how to select the corresponding drive under some parameters. In the list of parameters at this time, there are a few slow-down machines with a ratio of 50. These are the types ofreducing machines that can be matched, and the range of output-reverses formed during such matching is between 2 and 416 per minute, the range of gear-reducing power-reducing ratio is between 68 and 714, and the range of output-reverses is between 32nm and 4580nm. if you choose areducing machine to match it, then you can match itDouble- power deceleratorThe models are 050, 063, 075, 090, 110, 130 and some combinations ofreducing machines。

If the 075 is selected, the rate is 50, the output is 56 and the output is 189nm; the 090 is chosen, the rate is 50, the output is 28 and the output is 368 nm; the 1100 is chosen, the rate is 50, the output is 28 and the output is 384 nm; and the 130 is selected, the rate is 50, the output is 18 and the output is 573 nm. use different power units on different equipment andGeared motorMake a match. The type ofreducing machine that can be matched with a s seriesreducing machine is the s37, s47, s57, s67, s77, s87, s97, s87r57 and s87r57. An earlier user had to choose a combination of areducing machine, and his request was to use 1,500 w to match thereducing ratio of a snail snail-reducing machine to 50, and in which case would it be more appropriate? The process-top user has a clear use requirement, the power of the power of the machine is 1,500 w, thereducing machine is matched by a snail-strangler rather than a gear-regulator, in which case we choose to use theregulator and the s series-regulator. Because of the large difference in power between the electric and the general three-symmetric motors, the electricity is selected because of the electrical function. in summary, it's a series ofreducing machines that are more suitable for use, because thereducing machine has just 50-to-50 parameters, andHelical-worm gearmotorparameters do not meet the requirements for use. more automation equipment, however, chooses to usereducing machines for matching use. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html