Coal mining equipment requires 11 kwfa-seriesreducing machines to reach the 1,600-to-electric model. When matching power is reduced to 5. 5 kw, the fa-series decelerators can reach 1,600, but several other series do not meet the requirements. and using the s series to lock itselfGeared motorIt's not an ideal match to make. The range of the deceleration ratio at this time is between 7. 24 and 835. So the fa-series decelerators and the electrics are not in the range of options, so they are excluded. In the list of parameters, the rate-reducing ratio ranges from 7. 88 to 55. 79, and at this point it is even further away from the actual need for use, so we use the same situation to exclude him. At this point, there is also a gap between the deceleration ratio and the actual need for use, so that differences are matched. Would it be possible at this time to have the parameters required for the use of the fa seriesreducing machines and generators? In a sample of the fa series ofreducing machines and electric generators of the boserl series and the electric generators selected, it can be seen that the models of the fa series ofreducing machines and electric machines that match at this time can be used on the equipment from the f77 series ofreducing machines and electric machines to the f157 series ofreducing machines and electric machines, as well as some combination models. There are relatively large differences between the parameters of the fa series of slowdownrs and the electrics selected in both scenarios, so users need to consider other parameters than the rate reduction ratio. It is clear that the requirements of 1600 are far from those of the user, so this fa-series decelerator cannot be used at this time to match the 11kw machine. the other option is to use a snail snail-fa seriesreducing machine combined with an electric machine, which can use two 40sTurn frequency brakes slowing downThe combination is 1,600. At this point in time, the deceleration ratio ranges from 4.28 to 302, and is different from 1,600 to a numerical level, so it is also divisive。

In the four major series of fa-series slow-down machines and electrics, if the 1,600-scale fa-series slow-down machines and electrics are to be used, then the fa-series slow-downs and electrics at this time must be in combination, so the combination of fa-series slow-downs and electrics would be suitable for use in one of the fa-series slow-down machines and electric machines above. Since single-fa-seriesreducing machines and generators are not sufficient to meet this demand for use, only group use is selected. in the r seriesMotor gearedIn this case, when this fa-series decelerator matches the 11kw electric power, the matching fa-series decelerators and the electric power model are quite numerous, but the rate reduction range is between 1. 42 and 295 at this time. In view of the fact that the four four major series of fa-seriesreducing machines and electric generators described above are not fully functional, what should be done at this time? There are two options. There have also been previously shared power sets on coal mine equipment, as well asreducing and electrical units in the fa series, most of which require blast-resistant functions in such an environment. Would it be better at this point, using the k-cone gear-speechers and electrics? At this point, the type of fa-series decelerators and electrics that can be matched by the fa-series decelerators and electrics in the course of their use, from the k77 series ofreducing machines and electrics to the k167 series ofreducing machines and electrics, as well as some combinations, are serviceable. So the same requirement is used by the users at this time, which is to match thereducing ratio of the fa series to the electrics after 11kw. so, what kind of fa-seriesreducing and electric type is required at this pointGearbocThere are no suitable FA seriesreducing machines and models. How different are the types of motors and FA-series decelerators in the course of their use, and what should the FA-seriesreducing machines and generators be aware of in the process? In the last selection, one user was required to use the FA-seriesreducing machine in coal mine equipment after combining it with the electric power. http://boserlgearreducer.com/product/list-faxiliejiansuji-cn.html