The hyperbolicdown machine is mechanically shifting. An umbrella and axle gear brakes are not interchangeable. Two-way pulse for a composite rollerBig load retarderThat's the type. The hyperbolic decelerator soft switch is to achieve a positive reverse of the roller by switching the rods between the gears during the switch. Toggle means to control the flow of the power source using a clutch or dial-up switch to achieve a positive reverse of the roller. The mechanical shift of the umbrella-axis slash gear-reducing machine is achieved through a fixed mechanical structure, with the common machine switching to an institution with inert wheels, a wrinkled pole, a wrinkled slider, etc. The gear exchange facility developed by the Southwest Petroleum Institute allows for the switch of rodents, but the structure is symmetrically complex, and there are shocks and constraints on development in the operation of the hyperbolic reduction unit. There are two main topics for the clutch switch: because the hyperbolic decelerator is a heavy loader, and when the clutch switch is applied, there will be a greater impact, which will significantly reduce the life of the clutch and make it easier to malfunction. Use dial toggle to achieve hyperbolic sidesGeared motorThe shift-or-turner is more complex in structure than the clutch and has limited number of switchings and shorter working hours without a reason. The non-interchange is the design of a mechanical structure, not to achieve a positive reverse of the roller by switching, which, after setting the pattern of motion, is applied in the same way, and the drive-down roller of the designed mechanical structure is reversed in accordance with the given pattern, thus driving the pump poles up and down in accordance with the pattern. This switch is highly reliable and has a good development perspective, but there are issues that have not been resolved, such as the inefficient switch-over and the heavy load of the parasol-axis gear-reducing gear。

It is more feasible to achieve a positive reverse of the roller than the first two. With the advent of computer-aided design and computer-aided manufacturing, it has greatly reduced the design and processing difficulties of hyperbolicreducing machines, and the re-accumulation of research on non-converted gears, compiled by a large number of scholars based on the non-convertised gear theory。Motor geared reducer, voltage, voltage (reducing), double-curve gear-reducing, voltage (enhancement), rollers, oil rods and pumps, and weight composition. The non-planetary gear-rotation unit is the core sector of this study, and the umbrella and axle gear gear-reducing vehicle has a regular, positive and reverse-propelled roller in reverse, so that the pumping pole is pumped up and down in accordance with the given motor pattern. In the 1930s, a scientist came up with a hyperbolicreducing scenario that caused a sensation. A soft switcher for an umbrella and axle gears. An umbrella and axle gear reduction. By mid-20s, a number of scholars had begun to try to explore non-converted gears, an emerging technology that had begun to develop rapidly, some theoretical writings had arrived, and more research had been done on the theory of an umbrella and axle gear brakes, which were theoretically mature but were not widely applied because of the influence of the water equivalent at the time。Right-angle shaft reducer motormechanical switching is divided into three categories: switch, soft switch and no switch. http://boserlgearreducer.com/product/list-zhiajiansuji-cn.html