How do you choose a snail braker 400w, which needs to be converted from 3,000 to 200? Then, according to the b0serl model, it is s77 that can meet this demand. The identified model was the s77 decelerator with his 400w power. in the nmrv turbo, its use parameters demand is not what he needs, so he chose the gs seriesbrakes motor-reducerI don't know. In a situation such as this, it can be said that, as a result of the motor-banded modulation and positioning function, similar combinations can be selected on some automation equipment. But it was just said that thereducing machine had a poor self-locking function, so it was about to be handed over to the motor-reducing machine on the non-realizable. If there is an electric brake in the city's streets, the normal gear-retarding machine is the mundane brake. What he needed was a self-locked brake, so he locked the turbine in all the brakes. If a self-locked turbine is selected, the rate reduction ratio is at least 20-plus. So the choice is based on 0. 37 kw's triple-discretion machine, and the gs turbo decelerator is selected on the basis of the calculated 15. By his description, we can see the power of the power, thereducing ratio, the size of frank. if it needs to workGear with motor50-60 is ideal. Only turbines can achieve a reverse self-lock. So how far does it take to get to the self-lock? The needs of the user just now are not adequate, so not at the time of choice. however, in the general selection data, since the general match is a three-to-one walker, there may not be one of those 400 w, which is closer to 370 w。

So how do we change thereducing machine to make it more self-locking? We're going to put the power in a self-lock, or a brake. Then the model came out. So if you have a similar problem with the selection, you can consult the technical staff of the b0serlreducing machine. right nowHangerreducing powerYou can reach the 15-to-1. So how do we deal with a user who can't slow down like this to change a friend who needs to lock himself up? When it became clear that it could not be changed, the form of the electric power was changed. But by the data he provides, what does that mean? The self-locking effect of this snail gear gear gear is not ideal, and only 15-to-. His self-locking can be said to be un-locked or totally unlocked, because of the energy of an adult. In a selection of models for users, one of the users' needs was that of his 400w power, with a heavy waist and a self-lockedreducing machine, which turned the 3,000-turner output of the electric power into a 200-turner output. So how are we going to get him to do this? Let's take a look at the whole selection. So let's share a case today and look at it. At this point, since his flange is 60, when thereducing machine docks with the electric power, thereducing machine will be able to do a 60*60-modeland-to-electrical. yesGeared motorthe selection process is often broad-based, with different environments and different manipulation needs, leading to different demand forcutting or electric power. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html