Reasons for failure of snails in a French-styleretarder. In recent years, due to the requirements of the electrolysis processFrenchGeared motorIt's a long shift, so..FrenchGeared motorThe snail grinding has a severe effect, with a service life of only 5-10 months and is in operationFrenchGeared motorThere is also a general decomposition, which affects the normal operation of the shell-cutting machines, increases the equipment maintenance inspection workload and has a greater impact on the normal production of electrolysis. Snail failure analysis: The snail load capacity and the form of injury depend primarily onFrenchGeared motorThe corks' teeth are resistant to gel point erosion, wear-resistant and rotor-resistant bending, and are now calculated and calibrated through known technical parameters. The scrambling machine is a high-intensity, intermittent work equipmentFrenchGeared motorThe heat generated by the sub-motion of the snail is free in a timely manner and has less impact on lubrication. Analyzing, helmetFrenchGeared motorThe assembly, lubrication and dispersing heat have a small impact on the loss effects of snail grinding and do not require measures for the time being. From comparison and actual use of snail rims used at the scene:FrenchGeared motorThe main chemical content of the snail ' s rim is less than the scale requirement (metallic radiance towards brass). In the light of what I've said, the heave-and-shea machineFrenchGeared motorThe reasons for the loss and short life of snail grinding are the following:FrenchGeared motorSnails have a potential exposure stress of 257 N.m, less than 269 N.m, 30 N.m, less than 33 N.m. Calculating the hearing machine based on the increased operational rate of the hearer based on the mark and the live electrolysis processFrenchGeared motorThe medium snails bear a much smaller exposure stress than the original design value。

lubrication and snail sub-dispersion heat: from the above calculations, it is known that snails, scalding between rods, are sliding at 4.46 m/s, have higher ambient temperatures, medium load, oil-impregnated lubrication, and select medium load industrybrakes motor-reducerGear oil, used over many years, works better. It has a useful life lower than the original snail wheel. Snail rim mass and exercise: a helix hullerFrenchGeared motorThe snail rim mass was selected for zqsn10-1, metal simulation, as it was not possible to analyse its chemical composition because of lack of overhauling equipment, but only to determine its mass using a contrast method (the original assembly was compared to the snail rim). cross-observation and actual use of snail rims used in the field against the original snail rims found that snail rim crystals were thicker, more slags, and did not meet the requirements of the exercise process, resulting inFrenchGeared motorSnail gear. Confirm that the original design did not meet the requirements of the electrolyte production process and recommend re-engineering. The helium-crust machine is the main aluminum electrolyte production equipment used to process the case under the electrolytic cell (Aluminium Oxygen) and the electrolytic tank. Shell-cutting machine used on siteFrenchGeared motorThe snail quality and exercise process, compared to the original snail, does not meet the design scale requirements and the newly purchased snails should be strictly overhauled. Quality of assembly: shearing machineServo motor reducerthe assembly was carried out in accordance with the technical requirements of the equipment drawings, the air-borne test machines were properly trans-shipped, with no abnormal sound, no point of death, and the assembly method was extended for many years to confirm that the assembly was appropriate. http://boserlgearreducer.com/product/list-safxiiejiansuji-cn.html