How do you choose a set of 1 to 126 gear-reducing machines for feed mixers? In such a case, the technology would provide him with detailed parameters in light of his actual circumstances. In the user selection process, his request was to use a 126-to-peer gear-reducing machine, but he did not provide many other parameters for our equipmentMotor gearedProvide the preconditions for restraint. This process requires the user to be calibrated by a portable gear-reducing machine selected technical staff. If you do not know what to do with your equipment and what to do with your gear-reducing machine, you can consult the boserl-reducing machine-selection technologist, who can recommend to you a suitable gear-reducing machine for your equipment. And it does not need to run too fast, but it needs to be able to run 30 turns per minute. A short time ago, when selecting the vermin gear-reducing machine for the feed mixer, he did not know how to select the corresponding dent-reducing model for his equipment, and he consulted our dent-reducing machine-selective technologist to allow the technologist to select a suitable conductor for his equipment. In the case of equipment such as this, the choice needs to be made in terms of the capacity or size of the mixer and the total amount and object of the mixer, as well as in terms of the requirements of the mixer, which, when the parameters are clear, would be easier to select for the recoiler. utilizationFlow-reducing electric powerThe power drives the operation of the mixer oars, and then determines the size of the gear to be used for matching use with the gear-reducing motor type, depending on the capacity of the mixer and the of the mixer oars. His request was to use a 1:126-bed gear-reducing machine to satisfy the operational requirements of its hybrid, so how should it fit in this situation

During the use of the mixture, there is a device that has to be operated using a night gearreducing motor, i.e. a blending device. But it's important to note that when a user's mixing oars is in the form of a condensed volume powder, it can be more resistance during the course of the operation, so it's in the gearsGeared motorHe needs to have enough power to drive a mix of 8 tons of blends when he's out of the spin-off, regardless of the type of gear-reducing machine used. During the processing of some of the feed, there is a need to use a great deal of different raw materials, like maize or wheat powder or the slag of some rice grains, to form a more average feed particle after mixing. So the overall load of our existing parametric hybrids, as well as the requirements for it to run and thereducing ratio of the recoiler, in which case we can convert its parameters to the direct parameters required for the recoiler selection. These are some details of the user selection process. But when this hybrid is equipped with a gear-reducing machine, we need to consider a user's environment, and because dust may be larger, it may sometimes be used for blast-proof typesZip gear reductionor a shield, a simple protection for the gear-reducing machine. in different production tools, different scenarios and processes are used, and different mechanical devices are selected to match the corresponding position for ancillary production. http://boserlgearreducer.com/product/list-rxiliijiansuji-cn.html