How do you choose the variant brakes from 1:55? In the selection of a user in the recent past, he needs to use--Three-phase variant powerreducing machineOn his mud separators, but he does not know how much power power he uses and how muchreducing is appropriate to match. Let's look at some of the users and some of the topics that should be considered in the selection process. In the process of choosing thereducing machine used by the user, he used thereducing machine to operate with a roller, knowing the total weight of the roller with the mud, and how his equipment was working with the material, which was still 30 laps per minute and so on. The separation department is located at the back end of the conveyance and is capable of separating mud and stones. The transmitter's philosophies are belt-based philosophies, as the mass of the mud is such that the belt movement can improve the transfer efficiency. The inner walls of the transmission department are provided with internal threads that can deliver mud. There is a mud pipe below the separation section and a transmitter behind the separation section. Mobile cartridges include the delivery and separation sections, which are peripherally connected to the mission header and are drivenMotor gearedDrive. This is some of the connection to the user's equipment and how it works。

In the course of some sand-mining or quarrying processes, the stones that need to be dug sometimes contain more soil, and in order to separate the sediment or the mud, it is often the case that the use of some mechanical equipment for treatment is chosen - on the one hand, progress in the efficiency of the work and, on the other hand, specification. paradoxically, the operation of the user's device is as follows: mudslides go from a delivery pipe to a moving cartridge, and water washes into a moving cartridge, the driver's three-symmetric repertoire respirator drives a moving bullet, mudslides go along the inside thread to the separation, muds and sands are separated, separated mud is discharged through a mud piping, separated stones are drained from the tail end of the separation to the transporter, and the you can give some of your device's detailed functional parameters to boserlGeared motorSelect technical staff, let them give you a choice

In the process of choosing areducing machine, the choice of areducing machine by which the selected technologist communicates with the user has a rate of 55, at which point he does not know how much of the gear-reducing machine is matched to achieve this parameter and can drive the operation of the equipment, so thereducing technologist communicates with the user to obtain details. Drivers include motors andreducing machines, which are connected toreducing machines. However, the user is not aware of the details of the user ' s equipment, so it is not easy to select the appropriate model for matching use when selecting the motor-reducing machine. The user's mud separator consists of a delivery pipe and a flashlight and a driver's gear decelerator or..Snail scaldingWait. The delivery pipe reaches into the real feed point in front of the moving cartridge, and the moving cartridge is fitted with a convex, which is supported by the wheel. These parameters allow for the calculation of a number of detailed functional parameters for the R87 decelerator to determine the model. When it is not known about some parameters of the user's mudslides separators, it is time to look at some details of the user's equipment. http://boserlgearreducer.com/product/list-faxiliejiansuji-cn.html