How do you choose a two-reducing machine 1:62 for thereducing machine on the electrolysis polisher? Boserl retrenchor selecting technicians need to communicate with the user to determine the model. when the user selects the motor retrenchor for his electrolytic polisher, the choice of the type and the matching of the functional parameters would be more appropriate to his requirementsRight-angle shaft reducer motorSelective technologists communicate with users to determine. There are times when plating is required during the production of metals, but sometimes it is not so smooth during the plating process, so it is necessary to polish the surface in such a way that the surface is smoother and the quality of the product is increased. Users ' polishing devices include electrolytic plume body, damp support leg, filtering layer, zipping, eccentric wheel, roller motor reduction, electrolyte, cathode block, filamentary metal parts to be polished, interpolated interfaces, towed circuit wheels, anode electrodes and steering wheels. In this user selection, he did not have detailed parameters, so he could not choose the electric power used on this electrolytic projector andReducer+MotorModel matches. The internal coats of the electrolytic plume are electrolytic, the liquid surface of the plume is above the moving limit height of the filter layer, the inner cathodes of the plume are lined on both sides of the inner cavity of the plume, with the cathode of the plume in contact with the direct current power source of the power supply, and the pyramids of the plume are provided at the corresponding positions on the side wall of the plume of the plume plume, for the purpose of plugging in parts for the reception of filamental metal。

The center of the eccentric wheel is connected to the rotor-axis of the other side of the rolling r series deceleratorHangerreducing powerThe two-way evaporation machine, which drives up and down the filter layer, and both rolling evaporation machines are synchronized with the design, makes the filtration layer more fluid. The base of the electrolytic plume is supported by a damp-resistant leg on both sides of the base of the electrolytic plume, the whole of the electrolytic plume is in a cubic form, and the inner wall is smooth, the inner cavity of the plume is horizontally placed with a filter layer, made of non-metal, insulation material, and the perforation size is 2 to 5 mm, the side of the filtration layer is a roller with an inner wall in contact with the plume of the plume, both ends of the filter layer are connected to the external eccentric wheel by vertical pull, and the centre of the plume runs through the steering wheel structure on the side of the plume. The two ends of the filamentary metal parts are connected to the towed wire wheel for the collection of the post-empty parts and to the arctic electrodes for the storage of the filamentary parts for the filamentary parts, respectively, and the filamentary metal parts for the filamentary parts for the direct power supply. There is only one parameter limit for users, at which point the rate-reducing ratio of 62 is chosen, and how is it more appropriate in this case? In the absence of other parameters, look at some details of the user's equipment. In the selection of a user in the recent past, he had asked for the use of an electric decelerator as a driver for his electrolytic polishing device, at a time when he did not know how many electrics and how many of thereducing models were matched to meet the detailed requirements of his equipment, so he consulted BOSERLGeared motorselective technologists, for whom - 62-to-temporizers are selected. these are some of the details of the user's equipment, but in such cases it is not easy to select a detailed hard-to-penetrate model for matching use, so that the user needs to provide more detailed - some of the parameters requirements - to select the corresponding electric power and the type and parameters of the slowing machine for use. http://boserlgearreducer.com/product/list-kaxiiejiansuji-cn.html