5. 8 kw/5800w power model with a k-typereducing machine. in the process of refrigeration, locks and locks are tied, sequestered panels are embedded into the openings of the body, and the shield transforms the elastic seals of the seals into a sealing, blocking the side of the frozen tunnel and driving themRight-angle shaft reducer motorOperating, the driver transports the products to be refrigerated into the frozen tunnels, where the chilled products are cooled by the refrigeration agencies, and the refrigerated products are transported out of the refrigerated structures when the freeze is completed. Let's take a look at some details of the user's equipment. In the user's selection process, his request was to use an electric setType-k deceleratorHe said at this point he had determined the power of the power and the limitsType-k deceleratorThe type, then, will need to be selected on the basis of this basis in the subsequent selection process. The airframes are connected to the airframe on both sides of the width of the transmission structure by means of a condensable door, which is connected to the airframe at one end of the wide ground and which is adjacent to the ground by means of the cold storage handle component. This is the user's equipmentType kGeared motor reducer OneSome things. Liquid nitrogen freezers include airframes and transmission agencies. It uses a step-by-step approach to the rapid cooling of food from constant to low temperatures, reduces the freezing time of food and preserves food quality and taste, while improving productivity and economic efficiency. When the freezer process is completed, the locks are separated from the locks and the door of the locker is lifted up, the door is opened on the side of the frozen tunnel, the employee is able to defrost the inner wall of the airframe and the freezer in the body is maintained, it is easy to operate quickly and simple。

Transmission agencies have a transmission driveType kGeared motorI don't know. In the process of refrigeration, the combination of locks and locks sets the side side of the frozen tunnel into a blockade, the transmission-drivenreducing power sets in motion, the transmission agencies transport the frozen products to the frozen tunnels, the cooling and freezing of the frozen products by the refrigeration agencies, and the cooling and cooling of the frozen products by moving structures after the freeze has been completed. This is a good timeType-k deceleratorThe models are: k67, k77, k87, k97, k107, k127 and the combination models can be matched. The locks on the handle parts of the freezer are fixed on the body, and the locks on the handle components of the freezer are secured on the cabinet doors, which can be opened and sealed by the locks and the locks ' bindings and separations. But there are not many parameters in the above-mentioned process, so in this case it is not easy to select a detailed model for matching, so look at some of the parameters that fit in the selected sample. Users ' devices include: airframes, balancing foot panels, fast fixes, transmission agencies, transmission engines, refrigerated tunnels, freezers, mosaic panels, insulation layers, water intakes, flex seals, gliding, flex-card links, elastic segments, card links, etc. in the selection of a user a few years ago, his need was to use oneMotor-gear reducerHe didn't know how much to use at this timeType-k deceleratorIt's a good combination of models with this power, so let's see the freezer todayType-k deceleratorSomething about the electrics. The transmission agencies are located in the refrigerated tunnels of the airframe, which are used by the transmission agencies for the transport of products to be refrigerated. Refrigeration units exist in the frozen tunnels, which are used for cooling and cooling of products awaiting refrigeration. The background to the use of thawers is mainly due to the increasing demand for food quality and taste, coupled with the accelerated pace of subsistence and the need for faster, safer and easier food processing and storage. Detailed model parameters can be selected by consulting BOSERL selected technical staff or by downloading a sample. Refrigerated tunnels are present in the aircraft and are used to freeze the products. http://boserlgearreducer.com/product/list-kxiliejiansuji-cn.html