The parallel axle gears are broken by a high- axle. In contrast to the high- axis of the gear-reducing machine, which is the gear-reducing axis, which is intact in the part of its gear after it has broken, and without deformation or broken teeth, it was found that, during the destruction, the gear-reducing motor produced a severe graft pressure on the shell of the liquid-regulating device (cast iron) and the high--axis fractured, causing severe graft damage to the mouth-ret and damage, although the other end of the mouth-regulating device was relatively intact because of the protection of the axe-regulating casing. Conclusion: the parallel axle tilt gearGeared motorThe high- axle fracture is a multi-source, irritated, fracking, with the main cracking source occurring on the side of the side of the high- axle arc of the parallel axis. Analysis of the causes of the break-off: The cut-off of the high- axle of the parallel axle gear reductioner has been demonstrated by the cut-off of the high- axle of the slash and there are multiple sources of fatigue cracking at the cut-off. At the same time, the functional detection of the lost raw material found a low yield limit, the detection of the l.o. and microcosm of its surface and the detection of the micro-organism of its surface, none of which found signs of effective surface enhancement of thermal treatment of the lost axle surface, nor did it meet the hardness requirements indicated on the paper of the process, which resulted in the creation of a thrifting of the roots of the high- axealtation of the parallel axe, and of the skeletal arcular glament on the side of the slasher, resulting in the low-life, multi-week damage。GearbocThe high- axis was fractured early in the course of its use, and an on-site inspection revealed that the liquid complication device between the parallel-axis tilt gear reductioner and the electric powerer had flown out, the shell had broken and the electron rotor axis, which had been fitted with the high- axis, had curved and deformed after the accident。

Artificial macroanalysis: Despite the damage caused by severe graft, the fracture characterization from the cavity did not reveal any signs of greater plastic deformation prior to the fracture, and the fracture macrocharacterization should be determined to be abrasive fractureGear-retarding machineThe Fracking Axe Sampling Tests its Mechanical Performance Index found that its yield limits were low, while the plastic and shock resilience indicators were good, and that the material had a strong resilience characteristic that did not reflect when it broke, indicating that its fracture characteristics were consistent with fatigue and fractures, and did not support the secondary axle breakout method of the gear-reducing motor. The cut-off indicates a significant gravitational pattern of fatigue and fracture: the two interlocking interfaces that resulted from the break-up of motors by gear-reducing gears, both of which found the fratricidal fratricidal fragrance — the fratricidal line — and pointed to the precipitous source of the fracking, point to the stress side of the axle slot. Analysed:Gear reducer and gearboxthe composition of the raw materials of the gear-axis, the stenching of the material meets the relevant technical requirements; the cog axis has a low yield limit in its mechanical performance indicator, and the core of the axle is working with a greater concentration of the pull force, which, without enhanced treatment, tends to wear and tear and causes early failure of the cog axis. http://boserlgearreducer.com/product/list-pingxzoujiansuji-cn.html