Innovative concept of oil supply for paratroopers. Because an umbrella gear-retarder is a power conveyor orretarding machine, gear-rotation and high-pressure friction, some mechanical impurities, metal grinding, etc. are present in the gear-retarding tank lubricating oil, which is detrimental to the precision bearings that need to be reduced. In this article, we will outline the concept of this lubrication approach, with the next chapter focusing on how to achieve this oil supply。Gear with motorThe amount of lubrication is relatively precise, and excessive oil volumes not only cause unnecessary spread, but also affect the work environment of the plant, where the demand for the axle bearings of the paraplegic gears is not known at a small rate to meet the needs of the lubrication and friction reduction。

Changing the conventional oil supply for gear-reducing bearing parts is a different concept for future development, i.e., using oil spills when gears are rotated in a directional manner to collect lubricating oils to enterVertical reducerCollect the fuel box. Analysis based on the structure and operation of the gear-reducing motors: the direction of the work of the single gear-reducing gear of the paralysing gear is of a nature, the gear is impregnated in lubricating oils, the gear surface is subject to the rotation of the lubricant oils, the direction of the spilling is also one-way, and if the collection of oils in the direction of the lubricating oil is parallel to the collection of fuel tanks, the collected lubricating oils is always adequate and continuous, which will effectively address the source of the lubricating parts of the gear-reducing motors without the need for additional pressuring pumps to achieve a continuous programme of lubricating oil, and the location of the collection of lubricating oils is highly flexible, depending on the appropriate height and location, as required, to effectively address the problem of embedding within the paralytic gear-reducing tanks. Slipper horizontally lower than the central line of the bearings, and if the above-mentioned impediments are addressed, they can be largely utilizedAn umbrella gear-reducing machineThe lubricant in the case is the target for which lubricant is added to the bearings。

The source of the oil concept of the paralytic bearings is the large amount of lubricating oil stored in the paralysing case, the effect of which would have been very clear if it had been directed to achieve automatic lubrication in the paralytic case to the bearing part. Based on the structure and operation of the paralyzing unit, it can be observed that, because the gear-reducing unit is routinely located at the central level of the bearings, it is always above the level of lubricating oil in its case, and there is a defined altitude difference, so that the lubricating oil in the paralysing case could not have been used to inject lubricating oil into its bearings if no measures had been taken. For now, parasol gearGeared motormost of the designs were designed to complete the continuous lubrication of lubricating oil by the installation of appropriate qr cups at the bearing parts, as the storage of the cups was limited, and therefore the amount of oil in the gear-reducing motor lubricating oil needed to be viewed and added at any time, which required a dedicated person to observe it frequently and to raise the lubricating oil. http://boserlgearreducer.com/product/list-zhiajiansuji-cn.html