How does a self-retardation machine with a brake be used on a flip structure? This is a series of user devices. In the selection of a user in the recent past, his request was to use a self-locking brake with a brake machine on his flip machine, but he did not know how muchreducing model he used to match the requirements of his equipment. And..Servo motor reducerThe role of the auxiliary brakes can be achieved if the parameters are adequate, while the brakes can be more ideal and control the operation of the machinery at the right place. In the course of the work, the motor will be activated by locking out the s-series decelerator, placing the steel plate that will need to be cut or welded on the frame, scalding the steel plate through the l card, processing the steel plate, when it needs to be flipped, bringing the length required to do so by modulating the engine-driven stretcher, rolling the frame, flipping its steel plate on the one hand, and moving the wheeler and the long pole on the other, so as to drive the roller, and the l card block will untangle the steel plate, ensuring that there is no disorder in the roller process and spin efficiency. Different production processes require different machines, and the choice in this process is a demand of users. In turn, they are machines that need to be used in some industries. the user's flip-mechanicals include: support racks, scrollers, hydraulic stretchers, drums, plugins, long poles, block blocks, connectors, springs, cards, l card blocks, scroll claws, bar slotsElectricreducing machine - body machineWait. During the user selection process, his request was to use a self-locked reduction machine for a combination of use with a brake motor, but he did not describe some of the parameters requirements of his flip machine, so it was not easy to select a detailed type of reduction in such circumstances。

It's like some special requirements during the flip, and so onGeared motorThe selection process needs to be considered. So let's look today at some of the user's equipment and, in that case, the size of the power-reducing machine that should be chosen for a combination would be more appropriate for his use requirements. Such equipment needs to know the load that the agency drives during this process and the way he operates in order to select the appropriate electric decelerator model for use on his equipment. The use of a lock-down machine with a brake is due to the angle requirements during the flip process, as compared to a 180-degree rotation. The relative one end of the two racks is connected to each other, and the block is rolled to each end of the scroller, and the lower side of the frame is connected to the other sideGear with motorDrives a convulsion pole, side-wall scroll-to-convene tube, which moves with a long pole, one end of which passes through the trough that is opened on the frame and is connected to one end of the rolling claw, the centre of the rolling claw is connected to the top of the condensation, the lower end of the line is connected to the upper end of the frame, the other end of the convulsive claw is connected to the top of the frame, the other end of the convulsive claw is connected to the card is fixed to the card, and there is a strip on the seat, a threaded link between the screws in the sluice and the threaded hole on the L card block, the other side wall and the spring is connected to the L card. During the production of some substances, they need to constantly flip and process the materials during production, as if some of the fertilizers required fermentation, etc. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html