A special s-series decelerator with 27,000 w power sets for mine equipment. this is the case with the user's equipment, and since there are no detailed requirements at this time, you can only select some parameters larger than the s97 type when choosing to use the s-series deceleratorGearbocThe selection sample looks at the parameters and consults the b0serl expresser selection technicians. It forms a shield by collating the main blocker with the side end of the frame and by collating it with a screwdriver, so that the electrostatics of thereducing machine can effectively avoid the slippage of mineral material along the transport line during ore transport, providing greater security for the surrounding staff, safety and non-disturbation during the transport of progressive mine material, saving staff from difficulties in pick-up, ensuring continuity of production, reducing labour intensity of workers, reducing accidents in transit, providing a process of work, and also having the characteristics of user-friendly, simple structure and installation. The blocker is made up of the main block, a bumper, a panel, a fire shield, a panel, a bumper, a bumper, a bumper, an equal and parallel, and a transmutation around and outside the panel. During some of the mining processes, there are also differences between the devices used in different processes, in which case the corresponding machines are matched to the actual situation. so how big should it beGeared motorModels and matching the functional parameters to be used will make it easier to meet user requirements. Some of the user situations are described below. In a user selection process, his request was to use 27,000 w on his mine equipment with a s-series decelerator, and at this point he should choose the size of the s-series scalder to match it. see some details below。

At the time of its use, it first connects the drive-reducing machine on the front-end side of the rack to the power source of the equipment, then adjusts the slope to be transmitted on the frame through its on-board regulator, then activates the equipment, lets the drive-reducing machine run, lets the drive-up wheel run as it rolls, drives the conveyor belt on it, then dumps the mine material onto the conveyor belt, allows the transfer belt to transfer the mine material to the required location, and the whole of itMotor gearedBlocks were installed on each side of the shelf. The frame consists of an irregularly empty rectangular structure and a whole — body structure, parallel and identical to each other on both sides of the frame, a steering wheel at the bottom of the frame, a regulator at the middle end of the frame, and welding at the front end of the frame and at the bottom of the motor. Drivers - the end and snail snails are attached to the roller ' s roller by a tight rotor, the front end and the front end of the roller are attached to the right and the right side of the front end of the rack, respectively, and the roller is connected to the conveyor belt, with a conveyor belt on the top surface of the rack, and both end and end of the frame have a blocker. one is the choice of areducing machine for the s series, which is a snailreducing machine and can meet self-locking requirements when parameters are adequate; and the other is that the matching electrics choose to match 27000 wHelical-worm gearmotoruse it. the user ' s mine equipment consists of a rack, wheel, regulator, driver, roller, conveyor, conveyor belt, blocker,reducing, etc. two requirements were required in the process of the user choosing the correspondingreducing machine model for his mine equipment. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html