How to select specifications for r-seriesreducing machines. some of our users do not have detailed information on the reliability of the r seriesBig-rate slow-down machineWe have different levels of reliability for r-reducing machines because of the different users we use, the different levels of use of the machines, the fact that if the r-seriesreducing machines have been damaged, whether there will be an accident to our personal safety, and the different circumstances of the maintenance of thereducing machines, we have different levels of reliability for r-reducing machines, and the coefficient kr is the level of reliability that is actually needed to correct the original design. So this is the interpretation of the r-series decelerator specifications. The r seriesreducing machines are measures that conform to iso 6336, agma 2001-b88 and gb3480 for gear strength. medium-sized pc-calculating power (kw); pn-quantification power (kw); p2-worker power (kw); pc=p2kakskr≤pnGearbox motorThe rated power should satisfy the following premise:

Horizontal reducerThe rated power (i.e. kw) is determined on the basis of the application factor KA = 1 (the electric or working machine, the original headload is flat, working 3 to 10 hours a day, starting less than 5 times an hour, and, in this case, the promise to start the rectangular is 2 times the working rectangular), the exposure strength safety factor SHs 1, the probability of failure of a single gear, 1 per cent, etc. Now let's get to the point where the R-series slowdownrs choose the rules: KA - the use factor, taking into account the impact of using the condition; KS - the start factor, taking into account the impact of the start time; KR - the reliability factor, taking into account different reliability requirements. (SH ≥1.25, probability of expiry ≤1/1000) = KR = 1.25 = about 1.56 at more important occasions. First, we need to know what R-seriesreducing machines are, R-seriesreducing machines are all called R-series tilt gear-reducing motors, and R-seriesreducing machines are smaller in size, and the conveyor is large, and, in general, R-seriesreducing machines can only be set in terms of a given work condition, so when we choose R-seriesreducing machines, users have to consider different correction factors according to their needs, so..Geared motorthe plant should be based on the actual selected electric power. http://boserlgearreducer.com/product/list-rxiliijiansuji-cn.html