Series f parallel axle decelerators output a 77. 5-turn model. The user requirement is a 77. 5-minute output per minute after using a combination of a variable-frequency-reducing machine, in which case we need to select a suitable f-series parallel-axis-reducing machine to match. in the process of building the infrastructure, there are many times when, in order to be more efficient, it is like a highway or a bridge。Gearbox motorThe interior wall of the driver's main body is fixed with a spray board, which is attached to the pipe, and which passes through the material owner, and is cleaned through the pipe and the spray to the fabric owner for next use. Smuggled blades are helixed, so that, in the course of rolling, they can provide some impetus to concrete, which can be drained out of the source tube. When used, the motor drives the f-series parallel-axis decelerator-driven scroll-axis motion, which leads to the mixing of blades, and the full mixing of concrete by the mixing of blades, which prevents the deposition of particles such as stones in concrete during the fabric process, and creates an equal purchase. The use of pre-assemblys allows the mixer to be processed in one place and is more beneficial for the processing of some raw materials. In such a situation, it would be more appropriate to choose the size of the decelerator model to be used in combination. The material of the scraping board is rubber, so that it has some elasticity and is able to interact closely with the material matrix and have a better cleaning effect on the concrete adhesived to its inner walls. on the f series parallel axisGeared motorOn the selected sample, if it is necessary to use f-series power distributions up to 77. 5 voltages, the matching is required with a f-frequency generator, and the f67 reduction is available。

Including a material matrix, a feed tube on the outside side-top of the material matrix to facilitate input into concrete, a feed tube on the outside side of the material owner's side to the outside side, and a supply tube on the side of the wider feeder tube, a switch valve on the source tube to facilitate control of the release of concrete, a support panel on the outside side of the material matrix and a support panel on the outer side of the support panel to be fitted with a f-series support panelGearbocThe electrics, which have a fixed connection to the output end of the electrics, have a rolling axis, which is designed to prevent the sedimentation of rock-like particles in concrete during the material, to ensure the quality of the engineering, to weld support legs on the underside of the cloth, to support the legs by four, to support the set of legs with a millet, to support the bottom fixed link of the legs with a millet, to support the fixed link of the bottom of the leg, to allow the moving whole, to welding of the wall of the rolling axis with a fixed pole, to be attached to a welding plate, to be attached to the side of the fixed wheel, to the side of the wheel, to be fitted with a support leg, to be supported by four, and to be supported by a series of f. So let's take a look at some of the specifics of the user's concrete-stamping type with the atm. in the selection of a user before the immediate cycle, his request was to use a parallel axle decelerator in the f series of electrics on his equipment, and at that time his request was to use itInduction motorMatching the power, at which point the output requirement is 77.5 per minute. These are some of the cases where the user is a device, but there are no detailed parameters for the F-series parallel axle decelerator selection, so we cannot select a detailed model for matching use. http://boserlgearreducer.com/product/list-fxiliijiansuji-cn.html