What's the difference between a self-locking s series and three others? If the power of the electric power is greater, the option is to use the brakes with the k-seriesreducing machines above, so that the same means of installation are available. when selecting the corresponding electric andreducing models on the equipment of some users, for the four main typesServo motor reducerAnd thereducing machines made up of matching machines do not know where the difference is, so they need to be popularized for different types ofreducing machines, as well as for different users to know where they are, and what kind of equipment should be suitable for matching the self-lock-reducing s series. His output is in the form of a straight-angle output, i. E. , a 90-degree angle between the output end of the decelerator and the input end of the decelerator, so it is called a straight-angle decelerator. There are a lot of electrics that match. A simple summary is: coaxial output, an internal structure of tilt gears, a straight-line installation form, hard-to-face. Similar to the one-size-fits-all power-reducing machine above is the same internal structure, and the same range of matching power. This type of parallel-axis double-output can be used between parallel water lines. the power-reducing unit is a one-axis-outerGeared motorThe internal structure of the gears is slashed, the hardness of the gears is high, and the use of a good load can be measured by carbon seepage. And his internal structure is in the form of an umbrella gear, or cone gear. His matching power range is between 0. 09 kw and 132 kw。

When the user selects the corresponding electric andreducing machines for his equipment, you need to know some of the installation and functional requirements of your equipment before you can be recommended for use by the four main series ofreducing machines. And..Motor-gear reducerIt is a more special paragraph, whose output pattern differs considerably from the internal structure to the two above. He can match an electric power of 200 kw, select this type ofreducing machine when some of the electric power matches are relatively high, and his transmission efficiency can be 95 per cent. What difference does it make today between the four series ofreducing machines, and how can it be more appropriate to match the power of the self-lock-reducing s series with the power of the electric power to the actual use needs when choosing the type? The s-seriesreducing machine is the only one in the four series ofreducing machines — the one with a lock-in, but his self-locking function requires adequate understanding of the relevant premises on the functional parameters. But this snail brake does not match too much power, usually only 30kw. It's just that it's not in the same way, it's in a hard-to-penetrating machine. At the same time, such a k-series decelerator is also known as an umbrella gear (convene gear) straight-angle decelerator. This is areducing machine in the form of a straight-angled output, whose internal structure uses snail snails to move, so that when thereducing ratio reaches 40, it is enough to lock itself in. The f-seriesreducing machine is a tilt-wheel-reducing machine for a parallel axle output, which takes the form of a parallel axle output, which he can do in a two-axis manner. now, let's talk about the power-reducing set, the f series, the k seriesIt's got a self-lockerThe difference between the S series and the extent to which they can match. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html