The k-seriesreducing machine and the 0. 37 kw power machine are used to fence the de-fouling machine. In the course of the work, the lower part of the frame of the internal flow-through-barrel defusing machine is installed in a water channel, with a water shield to guide the flow between the front wall of the frame and the canal. He had clear requirements for power of the electric power and the type ofreducing machine, so it was better to select the corresponding models when choosing the type. but there are no detailed parameters required in these cases, so it's not easy to choose themRight-angle shaft reducer motorModels, in the sample of thereducing machine, which may match the k-seriesreducing machine with the 0. 37 kw type from the k37 to the k87reducing machine and a combination of seven sections. In the selection of a user a short time ago, his request was to use a k-seriesreducing machine for a group application to his grid de-fouling machine, which would be more appropriate in the circumstances. Let's see some details today about the type of motor-reducing machine used on the grid de-fouler. In the use of some environmental equipment, different environmental machines are used differently, as well as in some of the equipment, so the actual operating environment needs to be taken into account when the user selects the corresponding driver for its own environmental equipment. The space between the two sides of the shelf and the canal wall is the filtration channel. An impermeable internal flow-through-barrel de-polluting machine has a rectangular frame, with the right side entering the water end with a front wall, with a water entrance on the front wall and a half circle at the bottom. set up a drive on the upper part of the frame, which includes a driveHorizontal reducerA two-chain wheel that drives a roller-axis drive connected to 0. 37 kw power, with an ex-chain wheel placed on the front and back wall。

The board is set in the frame in the direction of the aircraft and forms a revolving filter belt, which corresponds to the link transfer chain at both the front and the back end of the board, which corresponds to the front and back wall. in detail, you can download a sample of the type ofreducing machine or consult with the boserlreducing machine technical staff to select the type for which the user selects the electric andreducing type for his grid-defaulterMotor-gear reducerUse with 0. 37 kw model. Sewage flows from the mouth to the middle of the board inside the shelf, filtered through both sides of the board and drained into the channel behind the shelf through the water exit. This is the case with some of the user's devices in operation. The drive was driven by a chain wheel in the k-seriesreducing machine and the 0. 37 kw motor, with the net plate being pushed up and down the transfer chain, and the slag that was removed from the length range was promoted from the bottom to the top, and on arrival, a shift occurred on the swab, and the slag flowed to the outside when the gravitational and top swipe was washed. The webboard is placed by moving chain frames on the back and back of the wheel and on the guidance tracks within the frame. There are sand vents at the bottom of the back wall, which are located below the netboard, with a narrow long hole preferred. On the left side, the water exit sets the back wall, with a rectangular tube on both sides of the front and back wall. Take a look at some details of the user's equipment without knowing the additional parameters required. yesGeared motorthe top of the shelf is covered by a swipe, which contains a spray hose, the nozzle on the nozzle sprays the netboard, a slag fight at the bottom of the nozzle between the netboards, one end of the slag and the other end extends outside the front or back wall. http://boserlgearreducer.com/product/list-kxiliejiansuji-cn.html