Select type of self-locking snail axis. It's made on a roller or flying knife. Install in self-lockGeared motorIt cannot be processed on the couch, but it can only be made on a stubble bed and sharpened on it. A cone-bread cylindrical snail (ZK snail) is a non-linear spiral snail. The tooth angle of the blade shall be that of the snail ' s base cylindrical spiral. The contours of a snail with a straight contours (ZN snail) are extended and the contours (N-N) are straight. When a blade is installed, the blade must be cut through the axis of the snail, as shown by the Tuakimid snail. Based on the different contours of the self-locker, the normal cylindrical snails can be divided into four categories: the Akimid snails (ZA snails), the Zl snails (Zl snails), the ZN snails (ZN snails) and the cone-bread snails (ZK snails ZN snails). The end of the snail, the Zl snail, is a scalding line, so it corresponds to a small scalding number (i.e., the number of the snail head) and a scalding wheel. This snail grinding difficulty can be difficult to process when the self-lock reduction engine is larger. In order to ensure that the snails and snails are able to fit in accurately, the length of the snails should be cut to the lengths of the snails; the central distance should also be the same as the central distance of the snailsGeared motorSnails move the same center distance. The contours of snails that match the snails described above vary completely。

Let's study this timeBig-rate slow-down machineIn the process of production, the snail axes are of many types and are still of the same type. They can be selected according to the needs of the client and the needs of the machine, so let's look at the various types of snail axes. Akimid snail (ZA snail) is a snail that is vertically on the plane (i.e. on the end) of the arc of the self-locked brake snail, and has a toothline (i.e. the axial scalding) on the line containing the axial line, with a tooth angle of α0 = 20°. It can be processed with a single blade with a straight blade on the car bed (when the steering angle is y ≤3°) or with a double knife (when y >3°). The ZN snails were also slashed in the car bed with a single or double knife with a straight blade. The bladed face should be aligned to the cylinder, with the blade being higher than the snail axis and lower than the snail axis. The Zl snail can be sharpened on the bed with two straight blades. Such snails are easy to grind, have higher precision and have become more widely used. At the time of processing, in addition to work as a spiral exercise, the blades also rotate around their own axes. This snail can..Gearbox motorSpecialized machine bed grinding. This snail is also difficult to sharpen. At this point, the convection of the convection of the convulsion (or sand wheel) is the screwdriver of the snail and the contours on the I-l and N-N transects. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html