The main axle of the reduction machine in series f is connected to the electrical unit. usually, a bolt is used to press the moving vehicle, using a package and an inside thread of the axle, or it is likely to cause damage to the inner parts of the decelerator。Induction motorThe main axis, also known as the “ray axis”, is the abbreviation of the “main axis”: has a symmetric diameter in the optical body. When a moving link has a bumper or a gear, wheel or wheel, a protective device should be considered, with a larger routing load on the output axis, and an enhanced type should be selected. The connection between the main axle and the electric power is clear enough to say that many of the good things are identical to the way in which it is installed, but only to notice that, in the course of the installation, the same axle is aligned with the electric power, that if it is not aligned, the installation is wrong, that the main axle is easily broken, and then the main axle and the electric power is broken, which can be described as a major project, and that due to the poor connection between the main axle and the electric power, both the f-series slow-down and the electric power are going to end up in both cases due to the many problems. Instead of steel-based fixed-axis, the inappropriate installation of this type of axis would cause unnecessary overloading, causing early damage to the bearings and even fractures of the output axis in severe cases; thereducing machine should be firmly installed on the base or base of the no-disrupting level, the oil in the discharge tanks should be removed and the cooling of the air wheel flow smooth. it's not reliableDouble-hole output reductionIt operates with vibrations and noise and causes damage to bearings and gears。

Our main axis combines the technology of high- electrics and high- bearings, which usually use composite ceramic bearings, which are resistant to heat and have a life of several times that of traditional bearings; Electromagnetic suspension bearings or static bearings are also used in some cases, with no contact in the inner and inner circles and an infinite theoretical lifetime; High- power technology, which is the product of the convergence of the electrons and the main axis, is the rotor of the electrons, which is the rotor of the main axis and can theoretically be considered as a high- electrode. The hub technology is a dynamic balance at high, not only as suchVertical reducerThe main axis also carries its own cooling function and, in order to heat up the high- main axis as soon as possible, generally rotates back to the coolant for the outer wall of the main axis, the function of which is to maintain the coolant temperature. Good quality increases the useful life and achieves the desired mobility efficiency; when a moving device is installed on the output axis, it is not agreed to hit with a hammer and the central line cannot be matched because it is easy to deflect the main axis with a hard object. The main axis can be said to be the core of the f series ofreducing machines, since the cut starts with the main axis, where the rolling-drive-deployed-deployed-deployed-deployed-deployed-deployed device forms a working pattern. We first understand the main axis of the f series ofreducing machines, which is the axis that receives power from the head of the head or the head of the electron and transmits it to other parts. installation ff87Geared motorthe main axis shall be seen in the middle of the moving central axis, and its error shall not be greater than the amount of compensation for the use of the axis used. http://boserlgearreducer.com/product/list-fxiliijiansuji-cn.html