What's a mask snailreducing machine with a 300-by-100 machine? There's a lot of options like this, and our technologists will be able to determine which model is more useful depending on the actual usage. if you use areducing machine to match it, you can match itStand-by gear brakesThe models are 030, 040, 050, 063, 075 and the following combinations with n or with pc. So let's take a look at the b0serl model, and see what kind of brakes we can match at this time. In that case, we need to know what the parameters of the c] hood are, and then we need to select the appropriate model for long use according to the parameters. Using 98. 80, the corresponding types are s37 or saf37, sa37 and sf37. Since the user has designated snails to be matched instead of gears, we have chosen to use snails as required by the user. let's look at the s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s-s, s-s-s-r-17, s67r-37, s77r37, s87r-57Gearbox motorIt is possible to fit 300w, and in parameters, the rate-reducing ratio ranges from 12. 48 to 2905 at this time, with an output-reverse range between 0. 45 and 213 and an output-reverse range between 10nm and 2930nm。

Since their parameters will directly affect the operation of the masking equipment, as compared to, when the model of the motor slower is determined. So the model we chose is 063Geared motorMatching 300w electrics with the user's mask. This parameter is somewhat spaced from the user ' s needs, so it is optional in such a case, but a related reconciliation is required. A few days ago there was a design for a mask machine. And the staff would have liked us to think that his mask was looking for a corresponding power and areducing machine. The right choices should therefore be tailored to the actual situation. Thus, the use of thereducing machine would meet the requirements for use without reconciliation. In such a case, the rate reduction ratio ranges from 7. 5 to 5,000 and the output twist range from 5. 6 nm to 2430 nm. After all, which one of the tworeducing machines matches 300 w can achieve a 100-to-100 cut-off. The user ' s requirement is to match the 300w machine with a snail snail decelerator to 100-by-cent. Thereducing machines available at this time are s-series snails and snails. The motor-reducing machines used on different equipment, because of the mechanical differences, select the corresponding model in such cases in accordance with the detailed equipment requirements. At a time when the user requires a 100-to-100 ratio, the list of parameters does not happen to be 100-to-100, and there is a closer 98. 80. and this is the range of parameters that should be needed by the userGear with motorfor 100, the corresponding decelerator type at this time is 063. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html