Usability techniques for hyperbolic decelerators. And the other littlereducing trc. Thereducing machine is slightly heavier in weight, with a low of 4. 2 kg and a high of 23. 5 kg. At the same time, the power of the turbo-reducing machine can be configured at 0. 18 kw-15 kw. and the other small reduction machine, tkmRight-angle shaft reducer motorIt looks like the nmrv snails, but it's more than the nmrv model. Thus, a summary of the characteristics of the trc hard-temperature reduction machine ' s inner gear structure and the high grindability of the axle output was used. The power of the gear-reducing machine is randomly selected on the basis of the use of demand and whether it has a variable frequency or brake etc. The three gear-reducing machines have a small height of less than 10 cm. It can be said that the tkm hyperbolicreducing machine was born for it, that thereducing machine was all squared, different sizes, but thereducing machine was square, so it was easy to match. Now, because of the widespread use of digitally controlled technologies, a great number of users usereducing machines, because of their positioning and precision. So how do they work, and what do they have in mind or some small skills in their use? Today we'll start with some of the usual smallreducing machines and configurations used. yesInduction motorSome of the gear brakes in the family are small and cute. The combination of nmrvs is also flexible, so that he can combine with his own model or smaller than himself. The co-axisreducing machine keeps this as high as possible. The power of the machine that matches is in the range of 0. 12 kw-7. 5 kw。

The rv turbine is not as accurate as the tkm hyperbolic side, and the tkm deceleration ratio is two digits after the decimal point, while the rv is integer. In contrast to the first two smallreducing machines, the relative advantage of this hard-to-penetrating machine in terms of the mode of output is the coaxial output. That's what these three mini-reducing machines are used for. It can also be combined with udl, which can also be used with pc. It's a hard-toe decelerator. It's a coaxial decelerator. Because of the small size of the slow-down machine and its self-locked functionality and low quality, the shared machinery is also more widely used. I think it's.Horizontal reducerThe smaller version. The smallreducing machine nmrv type bears 025-150, while the other axle nrv type also spans from 025-150. However, there are only five main types ofreducing machines, namely tkm28, tkm38, tkm48, tkm58 and tkm68. It is still a matter of detail to look at the demand for use and not simply pursue small sizes while ignoring the functional parameters of the selectedreducing machines. Let's see the nmrvdown machine, which is a very well-known one. This is a gear-reducing machine, which is much more resilient than a snail-reducing machine and does not change the gap. In terms of materials, the nmrv snails have both cast iron and aluminium shells, and theing model below the nmrv090reducing machine, including the nmrv090reducing machine, is aluminum-hull and has no refueling holes. And it's a gear. The model is larger than the rv90 and is made of cast iron with refuel holes. combining these three smallGeared motorfor the most part, the users of the threereducing machines were either because of space constraints or because of savings in use. http://boserlgearreducer.com/product/list-zhiajiansuji-cn.html