A lift requires a brake to lock the brake, how should it be chosen? Using the original matching model after a period of time, it is not appropriate, so it wants to replace a combination. This oneParallel axle reduction powerThe parameters are also relevant to meeting the need for use. If the s-er is not so ideal, you can also choose the snail snail. A lot of lifts or brakes, or equipment that requires brakes, choose only for the transmission of brakes, or for the lock-down or brakes, but, in some cases of use, the use of only-stamps may cause the brakes to fail in the course of the downturn, as they have just been used. The feet of the two slow-down machines may vary somewhat, so the latter can be selected in the case of space constraints. The model we have chosen is sufficient to meet his load needs and some other parameters. So we recommended two snails for his choice. So why do you think this model could have completely braked the equipment while it was running? As a result of this combination, thereducing machine is self-locked, while the electric machine is a brake-wire machine, the dual-insurance function can be achieved with two combinations of brakes. It is therefore suggested that this use environment could be used on a mechanical basis with a self-locking brake and a brake. it was the same thingHorizontal reducerWith an electric power. By looking at the parameters of the selected information, we can see that the original model of the user's twirl is adequate, and the electrics are brake-capable, so we replace him with areducing device with a self-locking feature, by using it and running it。

If it's a snail reduction machine, then the matching model is.Geared motorS97 with 22kw brakes. The user ' s equipment is a promotion machine, which requires a load of 5 tons in the course of his work. In the past, some users were designed for use, others were replaced by maintenance, and others needed to be replaced because they felt that the model was wrong. The detailed model used by the user during the original use was the gear-retarder r107-35-16kw, the problem of which was that the brakes were less than ideal during the up and down run, so it would be preferable to find an alternative. What is needed today is for the latter to be replaced because of the faulty model. There are two units of a self-retardator, one of type s, and the other - the one of. The choice of this model would break his previous passivity and thus achieve the effects he needed. And then the way out is changed in the alternative. Originally, the same axle output was used, but the latter was changed to a straight-angled output with a lock-down. The choice of the mode of output, provided that there was sufficient space, was not so important that the user needed to meet his needs in terms of parameters and functional capabilities. That is to say - in cases where self-locking is incomplete, the other party can also act as a remedy. It allows the equipment to operate smoothly and has a better brake effect. that's one of themSnail scaldingthe model. So in thisreducing machine, which is also areducing machine with a reverse self-locking function, the selected model is a 150--reducing vehicle with 185 KW brakes for use on mechanical equipment. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html