The pressure machine snail brakes match the 5 kw machine to 50 %. This is the type ofreducing machine that you can match. So let's look at the match between the two. if 4987 is chosen, then the output turns at 29 per minute, the output twists at 1620Vertical reducerThey were type s97, sa97, saf97 or sf97. This is a selection of the type and parameters of thereducing machine to be matched. Because the same machinery may be used in different contexts. There may be a larger difference between the devices used on different equipment, and a large number of the equipment needs to be used in a context where it is used. When such a match is used, the parameters developed at this time are broader. In view of the fact thatreducing machines on _ that meet the requirements for use are s seriesreducing machines, the difference for s seriesreducing machines is not significant, and the actual rate-reducing ratio is very close to 50 for 4987, so it is easier to match this with, and it is therefore recommended that users use s97reducing machines for their pressure machines. At this point, it is necessary to find the 50-to-cent parameter that the user needs, while there are no 50-to-50 parameters on the selected sample, but only the closer 4987. thereducing ratio at this time does not meet the requirements for use, so at this point, thereducing machine does not match the parameters, and in this case, the snailGeared motorExcluded. At this point in time, thereducing ratio is 756 to 16174. in the intervening period, the output range is 9 to 192 per minute, and the output is 250 nm to 4470 nm decelerators of the twister。

And what happens when you use areducing machine? There are not many models for areducing machine at this time, only 110 and 130 can be used, and then 10 groups after the parameters of areducing activity can be matched, so in this case the rate that can be chosen is from 35 to 1867 per minute,Gear with motorBetween 75 and 40. If, at this time, the s-seriesreducing machines are selected to be matched, the type ofreducing machines that can be matched is s67, s77, s87 and s97. The power of the power of the power match is to be matched with the power of the 5kw, which requires a 50-to-50 cut-off ratio, in which case we choose to use the s-series snail and snail. In a recent customer who was a pressure machine, he wanted to choose areducing machine for his pressure machine to match it to the equipment, so which one of thereducing machines was available at this point? His request is to use 5 kw to match thereducing machine of a snail snail to a 50-to-50 ratio. Which one of these parameters requires areducing machine to be able to satisfy the requirements? The following is a sample of the selected type of b0serlreducing machine to see what type ofreducing machine is required to be adequate at this time. the user of the device selection is specified for useSnail scaldingfor matching purposes, it would not be possible at this time to match a caricature-reducing machine, which did not meet the requirements for use. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html