How do you choose areducing machine with a self-locked lock to match the 5. 5 kw 3-simultaneous pace-referral model? If a s-seriesreducing machine is used, the three-simultaneous motors that match the 5. 5 kw are s67, s77, s87 and s97. The above fourreducing machines are compatible. households do not have detailed parameter requirements, so when matching, the user can first understand the parameter requirements of his/her gate before filtering out the corresponding oneMotor gearedModels and matching of parameters. Different requirements match different outcomes. If you've been consulting b0serl, you should know that a self-locking brake is a snail, not a gear-reducing. In such a case, the user needs the gate to be fixed somewhere, and in such a case, the choice of a self-locker to match is desirable. So how many of the two sets ofreducing machines are possible to match at this point in time to generate areducing model? Details of the time when these two matches are used are shown below. The above four models have four different types of brakes, much like the s87, and he also has the saf87, sa87 and sf87. In general, it is common to have two gates, one up and down and one on the left and right. it's the only one that matches the twoGeared motorThere are few parameters. Thereducing model of the 5. 5-kw can be matched at this time by a 110- and 130--reducing machine。

Possible use of gear-reducing machines, possible choice of snail-string-reducing machines, possible choiceAn umbrella gear-reducing machineI don't know. There are broader parameters at this time, with an output rotation range of 9 to 192 per minute and an output twist of 250 to 4470 nm, with a deceleration ratio of 7. 56 to 161. 74. This is the model and parameters that are matched with areducing machine. When different equipment uses electric andreducing machines, different power units are selected for matching use because they will be used for operational reasons. How should one of the users of the previous gate [door] device, who had had to choose the one-stop machine, be asked to use a three-step machine, 5. 5 kw, to match a self-locked brake? In the process of selecting a type for the user, the user is required to use a three-step, three-step- motor of 5. 5 kw to match a self-lockingreducing machine on his gate equipment. The choice of the type of power unit then depends on what is required between the equipment. The output twister is between 253nm and 1171nm, with a deceleration ratio of between 7. 5 and 40, and the output turns between 35 and 186. 7 per minute. In such a matching process, the user may choose any paragraph to be used for matching, as long as the parameters are sufficient to satisfy the needs of the gate. then it's more often used to match a three-trackerServo motor reducerIt is matched by snail snails and S-series. Selecting different formats for matching use according to different installation requirements. Within these parameters, the user selects a matching to the gate for use. http://boserlgearreducer.com/product/list-wolunwomenjiansuji-cn.html