How should i choose a composite lift-down motor unit with an 11kw power reduction unit? when matched with a r-series motor-reducing unit, the matching motor-reducing unit model consists of rx77 motor-reducing unit, rx87 motor-reducing unit, rx97 motor-reducing unit, rx107 motor-reducing unit and some combinations from r77 motor-reducing unit to r167 motor-reducing unitGeared motorI don't know. At this time, the list of parameters is full of 31 by, 33 by and 34 by minutes, corresponding to the r107 motor-reducing unit, r137 motor-reducing unit and r97 motor-reducing unit. So we chose to use four series of motor-retarders to match them for a rich user choice. when matched by a s-series snail-carriage straight-angle motor-reducing unit, the matching model is the s87 motor-reducing unit and the s97 motor-reducing unit, at which point the output rotation range is 26 to 187 per minute。

Different devices perform different functions at the time of use, and the parameters and content to be taken into account in the equipment selection process are so many that the chosen device is used as well as possible. The parameters created by different matching modes are different during matching. This is the three electric motor-reducing unit type that is optional. It's in the Staceu seriesMotor geared, the cone gear motor set-off and the snail motor set-off. At that time, the output range was between 4. 9 and 345 per minute, with 33 and 34 rotations required by the satisfied user, with the corresponding models f97 motor reduction unit and f107 motor reduction unit. In summary, the user can select a section based on the actual situation of the composite elevator. by mid-april, a client wanted to select a driver for his composite lift, and his request was to use the 11kw power to match the of the 30-35 turn of the output when the motor-retarder was oneElectricreducing machine - body machineIn which case, which of the motor-reducing unit models can be used for acquiring equipment? See the detailed selection process below. The list of parameters at this time is a 30-turn, 35-turn, 31-turn, 35-turn, 34-turn, with the corresponding motor-reducing unit type k107 motor-reducing unit, k97 motor-reducing unit and k87 motor-reducing unit. At this point, the combination of the electric motor-reducing units the range of the output of the one plane at 5 to 1035 per minute. The following parameters are taken from a selected sample of the boserl motor reduction unit. Different types have different characteristics, and users can use them on their own composite elevators. at this time, 30 turns and 33 turns are required to satisfy the user parameters。

The requirements of different users are different in the selection process, so it is clear in the selection process that the user does not require a matching use with an electric motor-reducing unit. The two different rates corresponded to the etrs, the s97. select k seriesRight-angle shaft reducer motorIf matched, the type of the electric-motive-retarder unit that can be matched at this time ranges from the K77 motor-retarder one to the K167 motor-retarder one and some combination motor-retarder one. When using the F-series parallel axle gear box, the matching ETR unit type is from F77 to F157 and a combination of ETRs. At this time, there are four options for a motor-reducing unit, as compared to the F97 motor-reducing unit, in addition to the FA97 motor-reducing unit, the FF97 motor-reducing unit and the FAF97 motor-reducing unit. Users can choose - paragraph according to needs. The range of output rotations formed during this process is between 1.8 and 204 per minute. http://boserlgearreducer.com/product/list-rxxiilijiansuji-cn.html