Axle oscillating gear reduction machine control. Cable rollers should be chained to walk-drivers and should have at least two laps of residual capacity from the receiver to the walk-end。Stand-by gear brakesThe collector's slide ring unit is satisfied with the corresponding voltage and current capacity requirements, with two carbon brushes per slide. The protection of the co-axis slash gear is provided by walk-down limit switches, end-point limit switches, trackers, anchors and position corrections, with large machines operating at a of 7.5-30 mmin and electric generators operating 10 x 11 KW. A belt with a belt, including a frame, a sensor and a scorer, is used to reduce the of the axle gear, and the belt is given a precision of > 3%. Arm-mounted belt protection units have been protected by fluids, lack of pressure, in situ protection and overload protection. Waterproof and dustproof. Pillow protection is provided by liquid coincidencers, rotor detectors and transient protection in electric circuits. Controls are directly activated by full pressure, 600 OV power from the main circuit is provided directly to the arm-mounted belt machine, using AC6000V 300KW 50Hz and a hydraulic pusher. The controls are directly activated by full pressure and the electric power is used by the AC380V 150KW 50Hz and by a hydraulic booster。GearbocThe protective device has a top- and bottom-end limit switch on the arms shelf, a loose wire-lined limit-button switch, a +21-11.8° overhead range, and a circuit power。

The control method consists of a series of electrical retardation and retrenchment, a hydraulic pusher, an electromagnetic brake, and a vortex brake, and a smooth, non-impact, small vibrating, and a safe rest at any location and at any time, within the line. SymptomsGeared motorUse of reliable protection and signal displays, when electrical equipment or circuits fail, the co-axis slasher protection is effective in the performance of malfunctioning equipment or circuits, there is an automated device to perform resistance when confronted with the driver ' s faulty manipulation, and a sound light alert is issued to protect the security of the equipment, such as when a large machine moves to a two-end limit, when the large machine automatically stops and sets up a failure signal and a warning signal. The co-axis slash gears are controlled by a straight-flow retrenchment system, which allows for the rotation of the arm racks to achieve a no-retraction, a rotation range of ± 160°, a rotation of 10-30 mmin, and an electric generator using DC200V 2 x 15 KW. Cable rollers are driven by the Power Rectangular electric power, the electric power is shut down in three stages, with a B margin and 100 per cent concussion at a given ambient temperature. The protective device has a left- and right-rotation end-point limit switch and a right- and right-arms-resistant impact limit switch. Controls are based on the use of mod-frequency modulus, with the coaxal slash gear-retarder equipped with a communication counter on the side side of the mod-frequency input, for high-intensity resonance feedback grids during the mod-band, with the advantage of starting a smooth, no impact, to achieve failure detection, fail-recording, troubleshooting guidance, supervision and adjustmentMotor gearedparameters such as working frequencies, working currents, etc. have enhanced mechanical protection, e.g., over-force rectangular protection, and protection against electrical inactivity during the operation of large machines. http://boserlgearreducer.com/product/list-tongzhoujiansuji-cn.html