(b) peddler gear-reducing machine protection and signal display units. Semi-automatic, manual and in situ manipulation uses plc control, which can be stopped as a matter of urgency if the plc fails. (b) port-slash gear-retarder pick-up machine: point-line walk-by-taker, point-rotation-taker。GearbocThe buttons for each drive with a light. There are three methods of operation of the recoil-reducing machine: semi-automatic, manual and in situ. The stoppages included power outages at large-line agencies and low-voltage lines. (b) port-slash gear-reducing arm belts are overloaded with electric motors, and each arm-carved belt is protected by switches and ground belts are chained. The gear-reducing machine has various fail-safe warning signal displays and is equipped with observationable positions to keep abreast of the mechanical operational status and troubleshooting. (c) pedestrian gear-reducing machine stacks: fixed-point walk-through stacks, fixed-point rotation stacks. Semi-automatic and manual manipulation is controlled in the driver ' s room and on the side. The emergency stop button switch and the sound light alarm button switch. Sets the number switches for semi-automatic manipulation. The rotation body and rotation limit, collision limit for arm racks, collision limit for ground belts and peri-dependency locks. the following equipment is on the monitor: voltage and current instructions for power supply (6kv feed, 380 v power and 220 v lighting power); positional displays for overhead, rotation angles and walk interval; acoustic light alerts and instructions for collision-resistant systems; wind display alarmsZip gear brakesThe scales of belts are shown at instantaneous and cumulative values; the velocity schedule of the wheel is shown; and the wheel load rectangular is shown。

BlankTilt gear brakesThe walker and the walker limit and motor overload, power and control cables overtight and electric overloads, and the link to the rail and anchor. Rotation overhead and walking handles. There are interlocking circuits when moving at high, which is only within the agreed safe height and angle; the belt position is running in the opposite direction, with a two-protected limit switch, with a slight deviation from the alarm and a two-banded machine running in the opposite direction; the transmitter and medium-controlled equipment are used to control cable transmission; and all electrical equipment is linked to each other. Semi-automatic manually manipulates the switch to select the switch. The ground belts of the rectangular gear-reducing vehicle are shown as operating lights, failure instructions and alarms, time set for the transfer module, etc. Feeders employ reliable protection and signal displays, and in case of electrical equipment or circuit failure, lined gearGeared motorThe protection is effective in the performance of malfunctioning equipment or circuits, where there is an automated mechanism to enforce the resistance when the driver is in error and a sound light alert is sent to protect the security of the equipment, such as when the large machine moves to the end limit at both ends, when the large machine automatically stops and sets up a malfunctioning and alarm signal. 6KV feeder power light, buttons to break switch. Emergency shutdown: one in each of the main walkers, the driver ' s room and the electrical room. Fighter agencies are linked to electric overloads and arm belts. http://boserlgearreducer.com/product/list-tongzhoujiansuji-cn.html