Transport and storage of a set of gear pumps for the gear-reducing and electric gears. When transporting a whole set of gear-reducing gears and motors, the channels shall be attached to the pumps and electrics (rather than to the bolts of the bolts of the motors and pumps) as illustrated below. Temperature sensors in pumps are used to monitor and protect pumps to avoid movingSpiral cone gear deceleratorThere was an anomaly with the electric set. At the time of the transport of the above-mentioned gear pumps, it may be possible to have an inner or assembled decompression valve with a recoiler set or a revolving valve, which can return the medium from the pump to the export end and to the inhalation end to protect the pump from being carried. The above-mentioned valves are used only for a brief response that is not intended to be accidental, rather than for frequent manipulation. In the course of transport, when lifting and laying down the equipment, avoid shocks, collisions and severe shock! It is necessary to place a set of pumps or pumps from the night gear and the electric machine on a wooden slab and in a protected place, so that the side gear and electric sets are in a normal state of operation and properly covered. The hysteria bolts of the recoiler and the electric generator set shall be used only for their own weight, and, accordingly, the hysteria bolts of the pump shall be used only for their own weight, so that the use of the above-mentioned hysteria bolts and pumps and the additional load they carry is strictly prohibited. In some cases, test membranes left over from the operation of the pumps on the test stage are attached to the surface. Please indicate on your purchase order the corresponding parameters for the bearing design. Only in advanceMotor gearedOnly after approval by the manufacturer of the electric power set pump can the set value of the depressure valve be changed! The end pressure of the above valve is 20 - 30% higher than the open pressure。

Unless previously agreed upon by the parties, the rectangular gear-reducing machine and the electric power package conform to our general packing guidelines. The state of the pump and its safekeeping must be checked at least once a year. If the pump/pump device is stored in the open, it must be carefully covered with the gear-reducing machine and the electric machine, and ensure that the gear-reducing machine and the electric machine set are not affected by tide or foreign matter. the tm gear pump has a double shell or a corresponding pipe, and can be used for the night gearGeared motorHeating or cooling with a liquid or gas media set of electric appliances. When the pumps were provided, they were not treated internally for embalming. If you need to store the pump for a long period of time, we suggest that you agree in the form of a contract to take special in-house anti-corruption measures. A set of pumps and their devices were shipped in a well-equipped manner. If the valves respond for a longer period of time, the corresponding medium is rapidly heated up, which can cause adverse changes in the medium and affect the normal operation of the pump。

Pumps and their fittings are packaged differently according to a different set of transport routes and specifications of the gear and gear. Pumps or pump devices are strictly prohibited from being stacked. Te gear pumps are heated with electro-heated drums, the temperature of which is continuously controlled by a system controller. The lubricating oils, sealing and sealing fluids and valves/parts used are separately packaged and shipped (if needed). For high-pressure and frequent response times, we suggest the insertion of an off-pressure valve on a side road with a reflow line connected to the tank. Pumps need to be driven without vibration by scratching axes; and the drive axis will not be affected by directional and axisal stress. An additional bearing of the centre bearing is used to buffer any radial load (from v-shaped belts, chains, gears, etc. ) on the neck bearing of the axis, which can be adjusted externally or internally from the pump. the above-mentioned tests unless the parties have previously agreed to the use of other oilsZip gear brakesuse mineral oil in a liquid set with electric power. http://boserlgearreducer.com/product/list-rxiliijiansuji-cn.html