Study of adhesive performance with self-lock reduction. On the basis of this test, ZQSn6-6-3 was selected as the best use of snail materialIt's got a self-lockerThe test confirmed that the material was more sensitive to the adhesion and that its anti-fouling capacity was moderate. TestRight-angle shaft reducer motorThe anti-fouling carrying capacity of lubricating oils is ensured within the loading of the test platform by means of intensive tests, such as the design of test snail sub-parameters and the selection of scalding materials, which will be conducive to the generation of collating damage, the maintenance of high test oil temperatures, overload operation tests, etc.It's got a self-lockerThe snails produce adhesive damage, so it's certainIt's got a self-lockerLubricant's adhesive capacity. I want to be able to meet the requirementsIt's got a self-lockerIt's hard to chooseIt's got a self-lockerThe snail snail material and its processing methods were explored in depth, and the snail material selected the surface hardening material 40Cr, which, by grinding its teeth through a high-frequency surface fire, ensured its strength, accuracy and resistance, and was tested and the surface was fully capable of meeting the test requirements. Selection of snail snail material:Servo motor reducerThe test results will be directly affected by the ongoing snail snail test, in particular the material selected for snail rotation, which is primarily known to be sufficient to require: the strength to be sufficient for the test; the resistance to grinding; the efficiency value; and the sensitivity of the glue。

Its shelf evaluation test is different from the individual analysis test in the oil mass scaleGeared motorThe central technology for the integrated evaluation of the mechanisms used for lubricants is to ensure better duplication and differentiation in the evaluation of panels and methods. Conclusion: Following the increase in the hardness of snail materials, the snail-backed anti-glycer unit has made significant progress. When the snail wheel material is ZQSn10-1, the material is of high hardness, test efficiency and low wear, and is used only for the efficiency assessment test, but the plywood test is not sensitive even ifIt's got a self-lockerThe degree of adhesive adhesion on the lower teeth of the higher payload is also slightly less favourable to the test staff. The snail wheel first selected two materials and carried out a large number of tests, which revealed that:It's got a self-lockerMore work has been done on the transfer of efficiency and on the testing of the efficiency of lubricants. But so farIt's got a self-lockerNo work has yet been done on a pilot study on the adhesive carrying capacity for lubricants. A little bit of lacquering spreads rapidly to facilitate the determination of test staff, and the repetitivity and differentiation of the test is better. Subsequently, ZQSn6-6-3 was selected as a snail material for the adhesive evaluation test. ZQSn6-4-2 when snail wheel material is ZQSn6-4-2 because it is softerIt's got a self-lockerWhen the payload is high, wear and tear are high and inefficient, while resistance to adhesion is significantly low, assessedIt's got a self-lockersnail oil plywood is not very differentiated by its poor capacity. http://boserlgearreducer.com/product/list-sxiliejiansuji-cn.html