The double- power-reducing plant operated 46. 5 t-ton sifter. the user's sift transporter, including the aircraft case and the feed door on the side of the said container, has a tilted setting, a real height near the input point is higher than another real height of the container, a tooth is placed on the lower side of the container and a squeezed wheel group is placed on the inside side of the frameRight-angle shaft reducer motorThe plant-driven squeezing wheel set up a material-out box at the lower end of the tank, with three different catheters at the lower end, and separate panels between the catheters and the catheters and other catheters. The selected sifter requires a sufficiently large double- power-reducing manufacturer to export a twist to drive the device. The user needs to select a double--reducing machine manufacturer that matches his 46.5-ton-driven equipment with a double--reducing machine, in which case should we match the power of the power and double--reducing machine model to drive the user's equipment? The following is the selection of the two- power-reducing plant in the selection of this sifter. In the user's selection process, his request is to useInduction Motor 3PhIn the case of 46.5 tons of equipment being operated by the manufacturer, there are no parameters to choose, and we will first look at some details of the equipment. In the process, the promotion body is placed on a mobile platform and on the side of a block-size charger for limestone sifting equipment, the collection box promotion body includes a rack and a transmitter on the rack for promotion to a block-size limestone collection, an oscillation set on the carrier, and the rack is placed at the top end of the transmitter with a plume of limestone that is to be transported to the steel furnace。

Detailed parameter requirements are not provided in the user's description, so it is not easy to select the corresponding double- power-reducing plant model in this case. On the side wall of the trunk, at twosGeared motorDo not set a handle on the end of the driving axis. A two- power-reducing plant, on the other hand, allows the carrier to insert an axle into the output hole of the two--reducing machine. In order to improve some of the equipment, at the end of the container close to the feeder port, the axis of the two- power-reducing plant is parallel to the axis of the squeezing wheel group, with the two ends of the rotor being connected to the side wall of the wheel, with a set of tubes on the side of the wheel, with a wall on the side, with the lower end of the shield attached to the outer wall of the said tube, with a free end on the upper end of the panel, and the free end of the panel when the reverse wheel is moved against the inside side of the input point to open or block the said entry door. (b) The free end of the block has a perforation, a screwdriver is placed on the side wall of the stated feed entry, a bolt is placed inside the screwdriver, and the free end of the block is attached to the side wall of the feeder so that the bolt described when the feeder is blocked can be plugged into the perforation. In the process of subdivision of the transmitter, there is a sifter. In the use of the transport area, many different equipments operate with different devices. These are some of the basic connections to the user's sifter. So it's big enoughDouble- power deceleratorproduction plants export twists to drive the equipment. in the middle of the block, there is a trough, in which there is a filtration wheel, in which the axes of the filtration wheel, driven by a two- power-reducing plant, parallel to the axis of the rotor, in which there is a vent at the lower end of the feeder, and on which there is a groove, the bottom end of the dent is parallel to the surface of the said plate. different equipment requirements differ in the course of industrial production. http://boserlgearreducer.com/product/list-kaxiiejiansuji-cn.html